Hello,
I am looking for schematic (and advice) of Grundig power supply board ZUV 194 R-06, or just ZUV 194.
Well, the fuse was blown. Replaced two shorted mosfets, fusible resistor and a ceramic capacitor (was damaged). Now, there is no short circuit, fuse doesn't get blown, but there is not DC on the secondary side of the board...no standby voltage, no DC voltage at all.
I am looking for schematic (and advice) of Grundig power supply board ZUV 194 R-06, or just ZUV 194.
Well, the fuse was blown. Replaced two shorted mosfets, fusible resistor and a ceramic capacitor (was damaged). Now, there is no short circuit, fuse doesn't get blown, but there is not DC on the secondary side of the board...no standby voltage, no DC voltage at all.