Announcement

Collapse
No announcement yet.

Samsung FP-5084 plasma tv no picture

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung FP-5084 plasma tv no picture

    Ok guys im stumped. This TV powers on to a grey screen (sustain boards are working). Waiting for the info banner to come up. Nothing but a dark grey screen. So I figured mainboard or logic board. I went ahead and crossed pin 1 and 2 on logic board and removed LVDS cable and bingo color patterns..

    So I looked over mainboard and nothing wrong with it as far as testing goes, but I figured what the heck ill pick one up anyway. New board came in off ebay guaranteed working..

    Installed, and same issue... So I have never encountered this yet, but is there a chance the logic board can be faulty even though I can get color patterns up? LVDS cable looks good and as far as I can tell no problems with it.
    Did I leave the soldering iron on?

    #2
    Re: Samsung FP-5084 plasma tv no picture

    how about a pic of insides ?? try reversing LVDS cable ??

    Comment


      #3
      Re: Samsung FP-5084 plasma tv no picture

      Tried reversing the cable no change. Pics to come soon
      Did I leave the soldering iron on?

      Comment


        #4
        Re: Samsung FP-5084 plasma tv no picture

        think the model # is Samsung FP-T5084 ? also assuming u tried selecting inputs ?
        Last edited by ajshoe; 05-07-2014, 10:47 PM.

        Comment


          #5
          Re: Samsung FP-5084 plasma tv no picture

          Yes it is. Sorry. It's actually FP-T5084X/XAA. Yep inputs have no change. menu shows nothing
          Last edited by freakaftr8; 05-07-2014, 11:16 PM.
          Did I leave the soldering iron on?

          Comment


            #6
            Re: Samsung FP-5084 plasma tv no picture

            Well a new logic board fixed this set. Somehow oddly even though I could engage the test patterns off the original logic board it would still not display anything coming from mainboard.
            But has a beautiful picture now...

            But now a new issue..
            With scene changes and a picture pulling more current from the power supply the power supply makes noise, almost a buzzing sound. Probably from a transformer? its sporadic.
            Last edited by freakaftr8; 05-10-2014, 01:24 AM. Reason: added info
            Did I leave the soldering iron on?

            Comment


              #7
              Re: Samsung FP-5084 plasma tv no picture

              It's possible for the LVDS input of the control board to fail. Rare, but possible. To be certain you can use a scope and check the LVDS data lines.

              That kind of buzzing is pretty typical for older plasmas and should not be heard once the case of the TV is on.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment


                #8
                Re: Samsung FP-5084 plasma tv no picture

                True I'm familiar with the frequency sounds coming off the sustains on plasmas. This is certainly power supply. And man does the power supply get hot. Hotter than most plasmas I've encountered.
                Did I leave the soldering iron on?

                Comment


                  #9
                  Re: Samsung FP-5084 plasma tv no picture

                  http://s845.photobucket.com/user/inf...02d2d.mp4.html

                  Here's the sound. Loud and gets louder while it's been on for a while. Lots of heat coming from the power supply. Hotter than normal.
                  Did I leave the soldering iron on?

                  Comment


                    #10
                    Re: Samsung FP-5084 plasma tv no picture

                    Checked for cold solder joints. None found. It's definitely one of the primary transformers. The biggest one on the power supply
                    Did I leave the soldering iron on?

                    Comment


                      #11
                      Re: Samsung FP-5084 plasma tv no picture

                      It sounds just like what my Panasonic plasmas do. The transformers on the power board do buzz a lot. It draws about 500W from the mains so that's not at all unexpected.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment

                      Working...
                      X