Trying To Fix: Samsung UN50TU7000 - Weird Fading Screen then Red blinking light

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • KYBOSH
    Badcaps Veteran
    • Oct 2011
    • 581
    • Unknown
    #41
    Originally posted by Davi.p
    Yes there is a non repairable short within the glass matrix, more than this there could be also some bad caps where you measured last time.. but the heating CPU could be another problem again..
    So i would need to wair for the short to fully develop before i could possibly try to remediate it (taping traces, etc)...

    This is a lower end display so i wouldnt shed any tears using it as a guinea pig to learn how to cut traces. Ive often wanted to try my hands at it. But if it behaves over the mext 24-48 hrs i may just donate it to someone who wouldnt mind a possibly soon to be expiring TV.

      Comment

      Previous 1 2 3 template Next

      Related Topics

      Collapse
      • Ryan.man
        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
        by Ryan.man
        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
        02-04-2025, 12:23 PM
      • Sam Scarbo
        Brother DCP-L2540DW scanner/printer - only showing blinking screen in LCD.
        by Sam Scarbo
        I got this broken printer from my brother who got it from the street. He asked me to help to fix it.

        I need help on fixing this machine.

        Issues/Observations:

        1) When connected to power, it's not working. Only showing blinking screen on the LCD. See pics 1 and 2. It is blinking every 2 seconds.

        2) I pressed the buttons on the control panel to see if there is any response. The "Options" button can turn off the LCD screen, and then press hold the power button for about 1 second can turn the blinking screen back on again. Other than...
        10-19-2023, 10:32 PM
      • ahoonid
        MacBook Pro A1398 L2013 weird jumping screen.
        by ahoonid
        Hey everyone.

        I have a 820-3787-06 board from a MBP A1398 which has a screen issue. The problem starts with a bit of noise just like old TVs when booting and when the OS is on, screen jumps are added to the little noise on the screen. The jumps are millisecond and go back to the original place.

        Since there's a little crack in the corner of the screen, I thought it has to be the display. But to my surprise it wasn't since I tried it with a fully functioning screen.

        The same issue isn't happening with an external display. I did a gpu/cpu stress test on external...
        02-07-2024, 05:56 AM
      • smic717394
        iphone XS turns off when press on screen.
        by smic717394
        Hi,

        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
        07-25-2024, 10:16 AM
      • Chrissygizmo
        Samsung UE55JU6800K half screen dark
        by Chrissygizmo
        Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
        I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
        02-10-2025, 12:33 AM
      • Loading...
      • No more items.
      Working...