LG 37" 37LC46 Screen issue after 10 minutes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • safesurfer65
    Senior Member
    • Feb 2014
    • 112
    • Scotland

    #1

    LG 37" 37LC46 Screen issue after 10 minutes

    Hello

    Got a LG 37" 37LC46 TV (2007) with a screen fault that occurs after 10 minutes or so. (See attached image). Faulty T-Con board ?

    Many thanks

    Mark
    Attached Files
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: LG 37" 37LC46 Screen issue after 10 minutes

    likely main board, check capacitors around CPU.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • safesurfer65
      Senior Member
      • Feb 2014
      • 112
      • Scotland

      #3
      Re: LG 37" 37LC46 Screen issue after 10 minutes

      Thanks Tom, I'll do that.

      Comment

      Related Topics

      Collapse

      • wizard13
        Dynabook Satellite Pro C50D-B-100 - BIOS Issue, Black Screen
        by wizard13
        Hello everyone,

        I am experiencing a BIOS-related issue with my Dynabook Satellite Pro C50D-B-100. When I power on the laptop, the screen stays black, and there is no response from the system. I suspect a corrupted BIOS.

        I have checked the forum and the available documentation but could not find a solution specific to my issue.
        • Brand & Model: Dynabook Satellite Pro C50D-B-100
        • Part Number (P/N): PYU13E-00C00PFR
        • Serial Number (S/N): 22028896H
        • System Configuration (SC): A1PYU13E1127
        • Motherboard Model: IP3_ACN16_MB_V21_20211222A
        • Power Input: DC 19V –
        ...
        02-28-2025, 02:43 AM
      • cloudy
        HELP - Contrast/brightness issue with subtitles on screen
        by cloudy
        Hi everybody
        Since day one I'm having an unpleasant contrast/brightness issue on my Asus laptop.
        Basically while watching movies, if subtitles appear on screen, the contrast or the brightness of the entire screen increases a lot (not sure if it'is brightness or contrast), disturbing the viewing of the movie.

        Last year I replaced my screen because got damaged and this contrast/brigthness issue persists. It happens only on the laptop screen, in fact If i plug an external HDMI screen the issue does not occour on it.

        It occours both on ubuntu and windows...
        01-01-2023, 05:12 PM
      • ScHAmPi
        Samsung UE48JU7000 screen issue after backlight replacement
        by ScHAmPi
        Hi all,

        Because of two bright spots and a couple of dark spots I decided to replace the backlights in my Samsung UE48JU7000. See attached photos:


        I thought all went well, but after full assembly and testing it out it turns out not all is fine. The backlights are completely fine but I have some weird issues on the right half of the screen. Since I didn't really touch the T-CON board (apart from taking out the ribbons of the display and reconnecting them on assembly) it would be weird that the issue is with the T-CON board... But based on the behavior of the service...
        07-15-2024, 05:41 AM
      • smic717394
        iphone XS turns off when press on screen.
        by smic717394
        Hi,

        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
        07-25-2024, 10:16 AM
      • spice_disc
        Vizio TV M50-C1 reboot cycle and static on screen
        by spice_disc
        I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

        The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
        09-08-2024, 02:37 PM
      • Loading...
      • No more items.
      Working...