sony kdl-40cx523

[adamp91gvm]

picture is all red ish and image stays in the back ground

[tom66]

Re: sony kdl-40cx523

Tab bonds or gamma IC would be my two guesses.

[adamp91gvm]

Re: sony kdl-40cx523

Fixable ?

[tom66]

Re: sony kdl-40cx523

Depends on what you can do. OK with soldering a 48 pin, 0.6mm pitch IC? (That's the gamma IC.) Tab bonds on 40" panels have often been tricky for me.
On badcaps this week: we've had 6 failures of AS15 gamma IC...

[adamp91gvm]

Re: sony kdl-40cx523

Im back on with this one I have a buffer witch ic do u think it might be

[adamp91gvm]

Re: sony kdl-40cx523

From these

[budm]

Re: sony kdl-40cx523

Up load using file attachment to show us the good clear pictures of the back side of the TV so we see the T-CON board.
Your TV may use this one but we do not know until we see the pictures of your board.

http://flattvparts.co.uk/sony-kdl-40...pe6-35-d057146

[adamp91gvm]

Re: sony kdl-40cx523

I have

[budm]

Re: sony kdl-40cx523

Pictures in post 6 is not the picture of the T-CON unless this TV has the integrated T-CON, that is why we need to see the back side of your TV. See post 7 of what T-con board looks like for the model of your TV, there may be more than one version of your TV. It is hard for us to fix TV from remote, so good pictures are required so we can see what we are dealing with and how all the boards are connected together.

[adamp91gvm]

Re: sony kdl-40cx523

There is no t con just a power board av and light board

[budm]

Re: sony kdl-40cx523

So you have one of those LCD panel with integrated T-CON then. You can see the Voltage test points for the GAMMA Voltage VGMA 1~18, take the DC voltage readings with ref to the chassis and list the readings so we can see what they are.