Pioneer PDP-6010 FD vertical half bar

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bebee
    New Member
    • Mar 2014
    • 5
    • USA
    #1

    Pioneer PDP-6010 FD vertical half bar

    Hi experts, just got a 2007 model PDP-6010 FD and found a vertical bar that came with it. Bar is from the bottom and carries half way up screen. It is 14" from the right screen side and is 3 3/8" wide. no colors, totally black. Other than that little thing the picture looks perfect. Any suggestions ??? I'm a new guy so i don't think I can post a picture yet:
    Attached Files
    Last edited by bebee; 04-01-2014, 02:01 PM. Reason: Didn't think I could attach a pix, surprise!
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Pioneer PDP-6010 FD vertical half bar

      A wide bar indicates a possibly loose connector or bad control board.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • bebee
          New Member
          • Mar 2014
          • 5
          • USA
          #3
          Re: Pioneer PDP-6010 FD vertical half bar

          Unreal, I've never posted anything anywhere before. So I guess I'll undo a bunch of screws and take the back off this thing. I'll try the easiest thing first I guess, poke around and see if I find anything that looks loose or not obviously right. Is it ok to crank it back up to see if it sorta fixed itself with the back off or do I have to put it back on again. I f that doesn't work, what board (s) should I be looking for. Thanks a bunch for an answer.

            Comment

            • audiofreak19
              Badcaps Veteran
              • Apr 2013
              • 556
              • usa
              #4
              Re: Pioneer PDP-6010 FD vertical half bar

              I got a pdp6020 and it has circuit boards all around the tv. I bet its a bad connection to the board that goes to the tab. I counted how many boards there were in the tv and I counted 20. Let me know the board number I still have the boards.

                Comment

                • mmartell
                  Badcaps Legend
                  • Oct 2013
                  • 3189
                  • Canada
                  #5
                  Re: Pioneer PDP-6010 FD vertical half bar

                  DO NOT run this tv with the back off without finding a way to hold down the Tamper Switch or you will be adding to your headaches.

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK
                      #6
                      Re: Pioneer PDP-6010 FD vertical half bar

                      That black bar COULD be a bad panel, I misread your description and thought it was one third of the screen.
                      But doesn't hurt to check connectors.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        • audiofreak19
                          Badcaps Veteran
                          • Apr 2013
                          • 556
                          • usa
                          #7
                          Re: Pioneer PDP-6010 FD vertical half bar

                          Yea either a bad panel or connection at the ribbon cable or the circuit board connecting the ribbon cable to the panel.

                            Comment

                            • bebee
                              New Member
                              • Mar 2014
                              • 5
                              • USA
                              #8
                              Re: Pioneer PDP-6010 FD vertical half bar

                              Thanks for all the rapid responses guys, I am overwhelmed. I think i found the motherlode of help here and am really grateful for the responses. You are all much faster than i will be able to be in getting to this. I will have to start this weekend when I have some quality time to get in to this project as i am a total beginner. I think I have to work slowly and take a lot of pix so I can put it all back together properly. I will report back Sunday or so. Again thanks !

                                Comment

                                • mmartell
                                  Badcaps Legend
                                  • Oct 2013
                                  • 3189
                                  • Canada
                                  #9
                                  Re: Pioneer PDP-6010 FD vertical half bar

                                  Yes do take pics or you will have a bag of parts left over lol. And remember the trap switch !!!

                                    Comment

                                    Previous template Next

                                    Related Topics

                                    Collapse
                                    • howardc64
                                      Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel
                                      by howardc64
                                      Failure Symptom



                                      No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

                                      Where is the short?

                                      Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.



                                      Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
                                      05-27-2025, 02:56 PM
                                    • rfxcasey
                                      Vertical Lines on Half of LCD Display
                                      by rfxcasey
                                      I have an Siemens HMI with vertical lines on half of the screen. These lines aren't scrambled garbage but rather very regular in pattern and color. I have replaced the LCD with a new one and still the problem persists. I'm wondering if this isn't indicative of a bad video process chip or video memory? Any help would be appreciated. The cable appears to be OK but one pin on the header is unpopulated, though there isn't any loose wire to suggest one broke off or popped out of the connector. In the picture below where the connector is busted out of the side, I did that with my small screw driver...
                                      05-16-2024, 06:52 AM
                                    • ItalianSat
                                      LCD SAMSUNG LE40A656A1CXXE - Vertical Lines on Half of The Screen?
                                      by ItalianSat
                                      Hello Everybody,

                                      I have a 40 inch LCD SAMSUNG LE40A656A1CXXE. Its problem is that there are Vertical Lines on Right Half of The Screen.

                                      Interestingly enough, when I move my mouse (in the case if connected to a PC) or when I am watching the TV, lines also move. At first appearance, I had thought that the problem might arose from loose vertical ribbons (COF), but when I opened up the TV for further investigations, I realized that the problem cannot be solved by touching them.

                                      Moreover, I detached the T-CON board for a new round of investigation. I personally...
                                      06-28-2022, 06:02 AM
                                    • mopenstein
                                      Looking for Vertical IC for RCA Chassis CTC159L CRT
                                      by mopenstein
                                      I'm working on my 27" RCA console TV built in 1990. It had some vertical rollover for a few months that went away after being powered on for a few minutes. I had been meaning to open it up and check it out but it had total vertical collapse before I could get to it.

                                      Now that I have the time I opened it up and found a couple leaky capacitors around the vertical ic. So I figured the caps went bad and cooked the vertical IC.

                                      I got the caps out and replacements on order. But when I took out the Vertical IC I saw that the chip numbers have been almost completely wiped...
                                      09-24-2023, 10:41 AM
                                    • Stanley1843
                                      Screen Display Vertical Multicolor Lines
                                      by Stanley1843
                                      Hello, I have a screen in where sometimes when I open it pop-up vertical multicolor lines (I would say the most of them are green). If I tun off and turn on the screen the lines dissapear or if I leave open the screen after approximately five minutes the lines gone. I measured the below voltages on the main PCB and on the T-CON board and the voltages are the same when it doesn’t display the vertical lines and when it displays the vertical lines. Also, I cleaned all the connectors very good with IPA. I moved back and forth the connectors and the COF tabs but the vertical lines didn't displayed...
                                      06-29-2024, 11:54 AM
                                    • Loading...
                                    • No more items.
                                    Working...