Announcement

Collapse
No announcement yet.

Pioneer PDP-6010 FD vertical half bar

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Pioneer PDP-6010 FD vertical half bar

    Hi experts, just got a 2007 model PDP-6010 FD and found a vertical bar that came with it. Bar is from the bottom and carries half way up screen. It is 14" from the right screen side and is 3 3/8" wide. no colors, totally black. Other than that little thing the picture looks perfect. Any suggestions ??? I'm a new guy so i don't think I can post a picture yet:
    Attached Files
    Last edited by bebee; 04-01-2014, 02:01 PM. Reason: Didn't think I could attach a pix, surprise!
    Tags: None
    #2
    Re: Pioneer PDP-6010 FD vertical half bar

    A wide bar indicates a possibly loose connector or bad control board.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

      #3
      Re: Pioneer PDP-6010 FD vertical half bar

      Unreal, I've never posted anything anywhere before. So I guess I'll undo a bunch of screws and take the back off this thing. I'll try the easiest thing first I guess, poke around and see if I find anything that looks loose or not obviously right. Is it ok to crank it back up to see if it sorta fixed itself with the back off or do I have to put it back on again. I f that doesn't work, what board (s) should I be looking for. Thanks a bunch for an answer.

      Comment

        #4
        Re: Pioneer PDP-6010 FD vertical half bar

        I got a pdp6020 and it has circuit boards all around the tv. I bet its a bad connection to the board that goes to the tab. I counted how many boards there were in the tv and I counted 20. Let me know the board number I still have the boards.

        Comment

          #5
          Re: Pioneer PDP-6010 FD vertical half bar

          DO NOT run this tv with the back off without finding a way to hold down the Tamper Switch or you will be adding to your headaches.

          Comment

            #6
            Re: Pioneer PDP-6010 FD vertical half bar

            That black bar COULD be a bad panel, I misread your description and thought it was one third of the screen.
            But doesn't hurt to check connectors.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

              #7
              Re: Pioneer PDP-6010 FD vertical half bar

              Yea either a bad panel or connection at the ribbon cable or the circuit board connecting the ribbon cable to the panel.

              Comment

                #8
                Re: Pioneer PDP-6010 FD vertical half bar

                Thanks for all the rapid responses guys, I am overwhelmed. I think i found the motherlode of help here and am really grateful for the responses. You are all much faster than i will be able to be in getting to this. I will have to start this weekend when I have some quality time to get in to this project as i am a total beginner. I think I have to work slowly and take a lot of pix so I can put it all back together properly. I will report back Sunday or so. Again thanks !

                Comment

                  #9
                  Re: Pioneer PDP-6010 FD vertical half bar

                  Yes do take pics or you will have a bag of parts left over lol. And remember the trap switch !!!

                  Comment

                  Previous template Next
                  Working...