Announcement

Collapse
No announcement yet.

Re: Samsung LE40R87BD LCD TV - relay clicking repeatedly but wont start

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: Samsung LE40R87BD LCD TV - relay clicking repeatedly but wont start

    Ok so noticed on the psu that there was two bulged caps changed them but the tv still clicks but won't boot up

    Any ideas
    Attached Files
    Last edited by sordids999; 03-20-2014, 12:38 PM.

    #2
    Re: Samsung LE40R87BD LCD TV - relay clicking repeatedly but wont start

    Needs an EEPROM reset, probably. There's info on this forum about jumpering pins 5 and 6 to accomplish the reset.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #3
      Re: Samsung LE40R87BD LCD TV - relay clicking repeatedly but wont start

      this may help try at your own risk!!! found on another forum im a member of
      For anyone with the same problem the procedure is as follows.
      On this model the eeprom in question is IC 1803 (24C256) 8 pin smd and is located on the underside of the main board near the common interface. The clock and data pins are pins 5 and 6 and are identifiable by the 100 ohm smd resistors connected to each of them. Fit a shorting link (on long wires) between the pins. Reassemble the chassis. Switch on and then remove the short. Bring the set out of standby. Now access the service mode as follows-
      Using the remote control, switch to standby, press info, menu, mute and power. The set should start and display the service menu. Using scroll keys select item 8 and enter by scrolling right. Select "tuner" and set to auto. Revert to previous screen by pressing menu. Now scroll to "reset" and enter by scrolling right. The set will revert to standby. Power back on and tune in stations.

      Comment


        #4
        Re: Samsung LE40R87BD LCD TV - relay clicking repeatedly but wont start

        As above but I found the time from powering on to removing the pin short is critical, I found it to be at exactly 1 second, good luck.

        Comment


          #5
          Re: Samsung LE40R87BD LCD TV - relay clicking repeatedly but wont start

          Can someone point me to how to reset the eeprom on this model please

          Comment


            #6
            Re: Samsung LE40R87BD LCD TV - relay clicking repeatedly but wont start

            as per post 3 and 4 this is for your model for a eeprom reset

            Comment


              #7
              Re: Samsung LE40R87BD LCD TV - relay clicking repeatedly but wont start

              Oops sorry missed your reply my phone didn't update was replying to toms reply thanks

              Comment


                #8
                Re: Samsung LE40R87BD LCD TV - relay clicking repeatedly but wont start

                its ok mines does the same too at times.

                Comment

                Working...
                X