Vizio E422AR 42in LCD

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • talonwade
    New Member
    • Feb 2014
    • 3
    • united states

    #1

    Vizio E422AR 42in LCD

    this lcd is about 1 yr and a month old. my logo light in standby is dim white when I turn on the tv with remote or the set, it will turn full bright white and the backlight comes on then I get the vizio logo as normal but where it would go the the next step (hdmi1 retrieving data please wait) everything cuts off then a second or 2 the logo comes back on to a dim white. I have replaced 3 caps that I could find at radioshack although none are/where bulging or appeared damaged. I have tried removing the batteries from the remote pushing all the buttons replacing batteries and holding down the menu and input, and holding the power button for 30 seconds and holding the power button while plugging in the power, nothing has worked. any suggestions?

Related Topics

Collapse

  • Bob1394
    Vizio M65-C1 | Logo appears for 10 seconds then off
    by Bob1394
    I have used the search, and am stumped.

    My Vizio M65-C1, Vizio logo appears for about 10 seconds then goes off.Power LED blinks 15 times then the TV powers down.

    I have read through many threads on the M65-C1 including the following threads. I feel like I must be looking right past the solution to my problem:
    https://www.badcaps.net/forum/showthread.php?t=81088
    https://www.badcaps.net/forum/showthread.php?t=84241 (not clear on the Eprom actions)


    Observations

    1) [Interaction] Power turned on via TV button (or remote)...
    02-08-2023, 01:03 PM
  • Super360
    Vizio E701i-A3 Vizio logo flashing then turns off
    by Super360
    Ok so here's the story. I was watching tv one day when all of a sudden I heard a pop from the back of the tv set and rushed to unplug the set. By this time the tv already had smoke coming out the back. It was not storming or inclement weather that day to cause a power surge to the best of my abilities. When I opened the tv up, I found that the three capacitors on the psu (highlighted in red) were all bulging and looked they had exploded. I replaced all of them right away and when I went to start up the tv after the "fix" it started just showing the flashing vizio logo as soon as power...
    07-25-2024, 07:06 PM
  • JaquesPratt
    Vizio D32f-E1 Powers on, has backlight, won't boot/no logo, no menu or video
    by JaquesPratt
    I have a Vizio D32f-E1 LCD TV that does NOT have a TCON board.

    This TV recently went through some 'death throes' and now won't boot. The first problem that began to manifest was while watching tv, the screen would 'freeze', and the image would dim over a few seconds until it was very dark. HOWEVER, the audio of the show would continue as normal. I could power off the TV for 5-20 seconds, power back on, and the video would be normal. This would occur 1-3 times when the TV was first started, and would not happen again after the TV was 'warmed up'. Not ideal, but this glitch was manageable....
    07-16-2024, 01:04 AM
  • Tynan Dill
    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
    by Tynan Dill
    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

    Upon bringing it home and plugging it up, it showed a standby light.

    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

    The screen seems to blackout and stay black, but with a flashlight I can see the display.

    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

    Assuming...
    11-22-2024, 01:46 PM
  • paulxxxx
    Vizio E701i-A3 stuck at logo, need service manual
    by paulxxxx
    The TV stuck at logo and cannot be turned off unless the cord is unplugged.
    I was given two main boards and exactly the the same thing happens to both of them.
    I have checked all voltages on the connector on the power board that goes into the main board and they all look OK.
    There are no signs of damage on any of the 3 boards.

    Would someone help me with a pointer to the manual? It's supposedly to be the same as E601i-A3.

    Thanks!
    09-08-2023, 01:11 PM
  • Loading...
  • No more items.
Working...