HDMI port component identification - Samsung NU7100 UN58NU7100F - Kant M2E - BN94-13065G

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • k3wf3w
    Member
    • May 2012
    • 33
    • Canada
    #1

    HDMI port component identification - Samsung NU7100 UN58NU7100F - Kant M2E - BN94-13065G

    Hey Badcaps,

    Hoping someone can help me identify this HDMI port, and/or a suitable substitute. I have scoured the internet, but no luck.
    Is the circle "T" symbol a manufacturers logo?

    Thanks!
    6 Photos
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Kambi13
      Samsung LF22T350FHRXEN wont work with HDMI port. Either cant get 1980x1080p resolution, or I get out of range message
      by Kambi13
      Hi all I have 2 Samsung LF22T350FHRXEN, working in a dual screen setup. Out of the blue one of them now wont display full resolution trough HDMI port, Either get out of range message or it will be stuck at 1024x768px. Tried reseting the screen, tested different HDMI Cables but with no luck.
      Need some advice
      Best Regards
      04-30-2024, 11:35 AM
    • RossMoodley1967
      LG LCD TV HDMI PORT FAULTY
      by RossMoodley1967
      LG LCD TV picture comes on intermittenly using hdmi port.The sound is on permantly.The hdmi ports looks fine and soldered in securely.The 3.4v coming to the main board is not present(not sure if will affect the hdmi port or where that voltage goes.)The hdmi cable is fine because it works on another tv.The ceramic caps connected to the hdmi controller ic is reading 39 ohms.Could the hdmi controller ic be faulty(feels very warm to touch).The RCA jacks work normally .Thank you in advance for your assistance..
      02-28-2024, 08:38 AM
    • DynaxSC
      ASUS ROG STRIX B550-I GAMING - M.2_2 port not working correctly with SAMSUNG SSD980 1TB NVME SSD
      by DynaxSC
      Hi,

      I have an really very weired issue with ASUS ROG STRIX B550-I GAMING.

      Some NVME (PCIe) SSD's are not working correctly in the second M.2 socket. An example of it is the SAMSUNG SSD980 1TB NVME SSD.
      Some other NVME (I have only smaller ones) disk do work without any problem, also SAMSUNG disks, eg an MZVPV128HDGM-0000.

      The behaviour is also really very strange, i.e.:
      • The disk shows always up in BIOS - so it is recognized, so far so good
      • POST-ing with this disk with fresh Windows 24H2 installation (done in the M.2_1 socket) in the M.2_2 socket
      ...
      02-23-2025, 01:33 PM
    • Gjackson
      Original PS4 BLOD after replacing HDMI port.
      by Gjackson
      Hi, ill try to keep this short. I got my hands on a PS4 with a mangled HDMI port and assumed that it would be an easy fix. before the replacement it booted up fine (white light) however after replacing the port it booted up fine for 2 times and then after plugging in an HDMI cable and turning on the console to check whether it had video out it never booted again, even after unplugging the cable. now it gets stuck on the blue flashing light and after 25-40 seconds it pops out the disk (if one is inserted) and shuts itself off. Upon investigating i found that the capacitors near the HDMI port are...
      10-22-2021, 02:14 PM
    • survivalbloke
      PS5 - no video but hdmi port looks ok
      by survivalbloke
      I'm a little green when it comes to consoles. I've done a fair amount of hdmi port replacement but not really any diagnostics. I've got a PS5 here which powers up but has no video output. I've also tried to boot to safe mode, also with no video. The hdmi port does not look damaged.

      Where do I go from here? Thanks!

      **UPDATE** I take that back. The external part of the port looks fine, but look at the pins to the mobo. Those pads are ripped off. How does this happen when the feet of the port are still sturdily soldered to the board?

      **UPDATE 2** The pads were...
      04-12-2023, 03:29 PM
    • Loading...
    • No more items.
    Working...