Polaroid FLM 2632 wont power up, no lights

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • ozmose715
    New Member
    • Dec 2014
    • 2
    • US
    #21
    Re: Polaroid FLM 2632 wont power up, no lights

    I have this same TV Polaroid FLM 2632 wont power up, I get the Blue light to come on and I hear like a fuzzy static sound from speakers but I dont see the polaroid splash screen come up any more Ideas on this has any one found any thing out thanks

      Comment

      • Rudy.ALvarez91586
        Member
        • Sep 2012
        • 22
        • California
        #22
        Re: Polaroid FLM 2632 wont power up, no lights

        check for voltage at your U4 IC voltage regulator which steps down the 3.3v to 1.8v https://youtu.be/uqePKWjrlnw

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • PantherDave
            Microsoft Surface Pro (5th gen) model 1796 - no power
            by PantherDave
            Hi all!

            I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

            I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
            https://www.badcaps.net/forum/troubl...-hardware-devi...
            05-29-2024, 02:01 PM
          • GLISIT
            Asus Probook P5440UF-XB74 power issue
            by GLISIT
            Hi all,

            TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


            I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

            A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
            01-16-2025, 02:29 PM
          • WVUfan
            PS5 EDM-033 One Beep,No Lights, No Power Troubleshooting Help
            by WVUfan
            hello. i've a ps5 edm-033 mobo w/ no power, lights, but one beep when power pressed. i've hooked to uArt and only error code is 80871001 (DDR4 No Power or Short Circuit). i have a donor board, same model, that does power up, fan spins, blue light, and beeps 3 times, then powers off. it has a botched HDMI port replacement job. so w/ the board i'm interested in, with the error 80871001, i was able to research and obtain voltages of the SSD PMIC. i've attached pictures of the provided diagram by DylanBBK (@d62 on Discord) and my voltages and picture of my board. my question is on my picture...
            08-11-2025, 01:12 PM
          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            ORIGINAL POWER SUPPLY BOARD
            7 Photos
            11-22-2024, 01:46 PM
          • sam_sam_sam
            Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
            by sam_sam_sam
            I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

            One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
            03-31-2024, 02:12 PM
          • Loading...
          • No more items.
          Working...