Vestel 17IPS12 using IC U101 BM1Q001 BM1Q001FJ pdf

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • alltvrepairs
    Badcaps Veteran
    • Jan 2014
    • 219
    • Malta
    #1

    Vestel 17IPS12 using IC U101 BM1Q001 BM1Q001FJ pdf

    Hi

    Am after a schematif for 17IPS12 that uses the BM1Q001FJ-E2. I have pdf for the V3 version that uses FAN6300 but circuit is not the same.

    Any help appreciated!
    Tags: None
    • yokoono
      Badcaps Veteran
      • Apr 2010
      • 484
      #2
      I only have the list with the value of the components from the 17IPS62 which uses the same integrated.​

        Comment

        Previous template Next

        Related Topics

        Collapse
        • An-klamm
          Vestel 17IPS12
          by An-klamm
          Hello!
          I am in despair with a Vestel 17IPS12 power supply.
          With the TV, the backlight just stays off.
          ( Backlight tested with backlight tester = IO)
          12V on the secondary side are there and constant. Voltage of the backlight is when switching on once briefly at about 60-70V and then drops slowly. (up to about 36V I have observed it whether it then drops further I do not know).
          But I am sure that the problem is on the primary side, because the DC high voltage is only at 295V. I expected about 330V (with an input of 230V 50Hz).
          I checked the mosfet in the component...
          10-18-2023, 01:13 AM
        • France_53
          Vestel tv, how to flip the image?
          by France_53
          Hello everyone from Italy, I'm here to ask for help on a Vestel TV, I've had a Vestel TV branded "XD" with a broken screen for years, but now I've found a Telefunken (still Vestel but older) and I've mounted the panel on the "XD" TV, it works, but the screen is upside down, given that Vestel does not allow you to rotate the image from the service menu, does anyone know how to solve the problem? the original panel is marked ves315WNDS-2D-N12 while the main board 17mb110, the panel I mounted instead in the tv (from the telefunken) is a ves315WNDA-02. ... It is not worth repairing...
          05-12-2024, 05:22 AM
        • FlailingEngineer
          Help with Bush Tv (Vestel 17mb95m Mainboard)
          by FlailingEngineer
          Hi, I was recently given a Bush Smart TV by a friend and the main board seems to be hanging on by a thread.

          Before we get to that, my first obstacle was figuring out the model number since the back sticker has gone for a walk. Upon taking off the back case, I noticed the following Vestel parts, 17MB95m mainboard, 17IPS71 (what I'd assume is power supply) and a VES420UNVL-3D-S02 display panel. After doing some research I think the TV I have is a Bush ELED42240FHDCNTD3D, based on the matching image here (https://www.manualslib.com/manual/11...td3d.html#manu...
          05-31-2023, 06:52 AM
        • massimomax
          Firmware TV Hitachi 32HE4500 scheda madre Vestel 17MB211S matrice: VES315UNVL-2D-N11
          by massimomax
          Chiedo aiuto per problema a TV Hitachi 32HE4500 che non si accende più,ho bisogno del firmware della scheda madre vestel 17MB211S codice pannello VES315UNVL-2D-N11 ?
          spero che qualcuno può averlo per riprogrammare eprom. grazie

          Post in English !!!

          I ask for help with a problem with a Hitachi 32HE4500 TV that no longer turns on, do I need the firmware for the Vestel 17MB211S motherboard, panel code VES315UNVL-2D-N11? I hope someone can have it to reprogram eprom. Thank you


          ​
          02-28-2025, 07:27 AM
        • Adenitz
          Troubleshooting Vestel TV, has standby, but cannot turn ON
          by Adenitz
          Hello,
          I need advice in troubleshooting Telefunken TV (it is actually Vestel). There is red Standby light but TV cannot be turned on either by remote control (which is good and tested on another TV) or by actual on/off switch at the back of the TV.
          Power board is Vestel 17IPS71 and I'm not sure about the mainboard, it seems like 17MB82S
          Both boards are shown in the attached photos.

          What is normally first that is checked in this case. I have removed power board, make sure it has no dangerous voltage on the big caps and check many components (transistors and diodes)...
          12-27-2023, 03:43 AM
        • Loading...
        • No more items.
        Working...