Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

[suriips450]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

I see, thanks.

[suriips450]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

Hi,

Can someone please advise if I can use MCP1700-SOT-23 as a replacement for IC1014 in the attached image in previous page?

http://www.ebay.co.uk/itm/MCP1700T-3...item1e7d8c41b0

[tom66]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

If and only if you can confirm that the same device is used in that position, as there are thousands of possible other devices.

[suriips450]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

Thanks tom66.

[suriips450]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

Hi Tom66,

BN94-03388B is compatible board as well for my LE46C750? There is one one on france. Thanks

[tom66]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

Cannot confirm sorry. Generally you want to get UK board. French board may boot in French, and also might not support Freeview or PAL video.

[suriips450]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

Thank you

[suriips450]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

I have replaced main AV board on this TV, it is now alive!

[tom66]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

Were you able to read the part number on the new board for future users?

[jbfr_54]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

Hi All,
I have this board, IC1014 is marked 1G1B but I have not found any component identified by this code.
I am also searching components with codes SOQ K92, SOC KZ1 and SOZ A13.
If anyone has an idea ? I spent hours on internet searching corresponding components without luck.
Regards. Jean

[tom66]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

possibly MT4S102T if in SOT23 package format

[Selectelectronics]

Re: Samsung LE46C750 No PWR, No STBY (Burnt FET on AV Board) Please Help!

Hi what main board did you fit in the end the 40" or the 46" Cheers