I have had this tv for about 3 yrs now. The picture started acting up and going dark. I found that if I put a fan (and eventually an a/c duct) blowing up towards the main board, the tv would work with no issues. So because of this I thought the main board was going bad. I eventually got lucky and found the correct board on line and replaced it.
Well it turns out the main board wasn't the problem. The tv still works ok for a little bit, but eventually the picture starts getting dark again. So now I am back to square one. What is the next thing I should look for that may cause the picture to go dark. I am open to any suggestions since I am a newbie at this.
Well it turns out the main board wasn't the problem. The tv still works ok for a little bit, but eventually the picture starts getting dark again. So now I am back to square one. What is the next thing I should look for that may cause the picture to go dark. I am open to any suggestions since I am a newbie at this.
Comment