Soldering station

zino

New Member

Join Date: Dec 2013

Posts: 4

Country: CYPRUS
#1

Soldering station

12-29-2013, 07:25 AM

Hi Guys

I will appreciate to have your opinion of buing one soldering station.

Hakko fx 951 or Goot RX802AS or Whatever u suggest!

THANKS
Tags: None

Previous template Next

Modification to a ZD-987 desoldering/soldering station using a external switching power supply

by sam_sam_sam

I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
- Channel: General Electronics Technical Discussion
07-01-2024, 06:34 AM
What soldering station should I purchase for 900M-TJ-I tip?

by chth96

hello.
A few months ago,I have purchased 0.1mm Soldering Iron Tip of below aliexpress link,But I noticed that It is totally impossible to use this 0.1mm iron tip in the T12 soldering station
https://ko.aliexpress.com/item/4001275635593.html
Is there any good soldering station which is possible to use 900M-TJ-I tip and have inexpensive or reasonable price in aliexpress?
Any reply would be appreciated.
- Channel: Equipment Usage, Soldering, Techniques, and Reviews
11-24-2023, 05:08 PM
Recommendations of quality soldering station and (separate) hot air station

by caprider

Hey,

I'm looking for some recommendations of a decent quality soldering station and a separate hot air station. I'm just a hobbyist, so even if (ultra)premium tools are not required, I still want some good tools. They should be available in Europe.

I now have a TS100 and some soldering irons and looking for some better tools.

1. Soldering station, budget around 200-240€
JBC BT-2BWA seems to be a good product in the budget.

2. Hot air station, budget around 200€
Up to now I've found ATTEN ST-862D to be a good option....
- Channel: Equipment Usage, Soldering, Techniques, and Reviews
01-15-2022, 02:05 AM
KSGER C245 Soldering station PSU 220V only?

by mkbehbeh

I purchased this soldering station when it was on sale at amazon. It had a slew of one star reviews, but the price was low enough that even if the controller and PSU were toast, the handle tips and stand were worth more than the price. All of the reviews mentioned that the unit was either DOA, or died on the first use. I looked on Aliexpress and the first clue was that KSGER still sold the 220V version of this station, but all of the 110V versions had been discontinued. I figured That there was a problem with the 110V on the power suppply and the controller would be fine.

I am...
- Channel: Equipment Usage, Soldering, Techniques, and Reviews
04-17-2023, 03:11 PM
Looking for a budget hot air soldering station for hobby use

by deep000

Hi,
I'm looking to get on Aliexpress a hot air soldering station for hobby use, nothing too fancy, just something "reliable" and budget-friendly.
Any recommendations for a "good" cheap one that gets the job done?
Thanks in advance
- Channel: Equipment Usage, Soldering, Techniques, and Reviews
04-25-2025, 02:29 AM
Loading...
No more items.

Soldering station

Soldering station

Related Topics