Samsung HP-T5064 picture grainy, dim & washed out

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Robb
    Senior Member
    • Sep 2013
    • 159
    • USA

    #21
    Re: Samsung HP-T5064 picture grainy, dim & washed out

    Originally posted by tom66
    Ve is provided by X-main on these, I thought.
    The "TP Ve" point is on the power supply.

    Comment

    • Robb
      Senior Member
      • Sep 2013
      • 159
      • USA

      #22
      Re: Samsung HP-T5064 picture grainy, dim & washed out

      Originally posted by tom66
      Ve is provided by X-main on these, I thought.
      I took another look at this TV today and found a Ve test point on X-main. It was a little out but correcting did not solve the issue. I'm beginning to conclude that the panel is damaged due to severe burn in.

      Comment

      Related Topics

      Collapse

      • Document Archive
        Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
        by Document Archive
        This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
        09-07-2024, 05:50 AM
      • TR103
        Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
        by TR103
        Hi, I have a Samsung UE50TU with:
        - sound and backlight, but no picture
        - when it arrived, it had a picture for a few seconds
        - it keeps rebooting
        - without ribbon cable between the two panel boards, it does not reboot but I have no picture
        - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
        - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

        - without cable between mainboard and lcd panel and with a jumpered...
        01-22-2025, 04:12 PM
      • JJAAMM
        SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
        by JJAAMM
        This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

        Problem
        TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
        07-06-2023, 06:01 AM
      • Mgiffune
        Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
        by Mgiffune
        I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

        I ordered a supposedly ‘new' Tcon board this time, and
        ...
        06-09-2024, 10:28 AM
      • Dodgethis
        Samsung QN75Q6DRA, No Picture, Has BL, and Sound
        by Dodgethis
        Hello all,

        This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where...
        09-11-2024, 07:39 AM
      • Loading...
      • No more items.
      Working...