Sanyo DP46470 won't stay on.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tony727
    New Member
    • Dec 2013
    • 3
    • United States
    #1

    Sanyo DP46470 won't stay on.

    The TV powers on for 1.5 seconds and turns off after the Sanyo logo. After 3 times it doesn't turn on anymore until reset.

    I've tested everything on the power board and it seems fine.
    Does anyone have a clue what might be wrong?
    I know its probably something on the main board, but I can't pinpoint it.
    Tags: None
    • newtothis
      Badcaps Legend
      • Mar 2013
      • 1556
      • england
      #2
      Re: Sanyo DP46470 won't stay on.

      Pics of boards individually and one of entire back of set so we can see all the boards.

      Also pic close up of any connectors from the PSU so we can read the silk print

        Comment

        • johnboy1313
          Badcaps Legend
          • Nov 2012
          • 1959
          • USA
          #3
          Re: Sanyo DP46470 won't stay on.

          You sure you got the right model number?

            Comment

            • tony727
              New Member
              • Dec 2013
              • 3
              • United States
              #4
              Re: Sanyo DP46470 won't stay on.

              Ah the correct model is DP47460 and I only have one photo of the whole back right now, I'll have to wait till tomorrow to get the other
              Attached Files

              if you find these attachements useful please consider making a small donation to the site

                Comment

                Previous template Next

                Related Topics

                Collapse
                • cj_reha
                  Mystery 80s Sanyo cap - perhaps polymer?
                  by cj_reha
                  Hey all I've been working on a 1984 Sanyo 27" color TV which had a smattering of bad caps in the video switching circuit. I found this oddball little 1uF 25V cap which looks to me like an early polymer, but I can't find concrete info proving it. I know Sanyo was a big player in early polymer cap development and this is the time period where they were just getting on the market, so I'm wondering if anyone has crusty old datasheets that could help identify it and determine if my suspicions are right? It has the same epoxy end seal and font/formatting as some old stock Os-Cons I've got laying...
                  01-06-2023, 09:24 AM
                • av4x
                  Fujitsu U7511 liquid damage, wont turn on anymore, does not respond to charger in any way.
                  by av4x
                  Good morning, everyone!
                  I've gotten my hands on a few laptops with various defects because I want to get more involved in repairing electronics.

                  First up is a Fujitsu Lifebook U7511.
                  It won't turn on anymore and doesn't respond in any way when you plug in a power adapter.

                  Model: Fujitsu Lifebook U7511
                  CPU: Intel Core i5-1135G7
                  GPU: Intel Iris Xe Graphics
                  RAM: 16GB DDR4 - 3,200 MHz
                  PCB manufacturer: ASKPCB?
                  PCB serial numbers: CP801602, CP7984241-Z4, E239218, CP809978-01
                  Damage: Liquid damage

                  The liquid probably...
                  11 Photos
                  11-01-2025, 03:09 AM
                • Malcolma172
                  Philips 42pfl6008s/12 red led comes on for a second and then goes away but 3.49v stay active
                  by Malcolma172
                  I was trying to repair my tv wich previously had a blinking red led 2 times and it kept going. After shorting the sdm the blinking led changed 5 slow blinks and 3 fast ones wich in the service manual meant error 53 / the fusion chip.
                  After I heated the fusion chip with a hairdryer for 5 minutes it started working perfectly but after a day it stopped this time no led blinks even in sdm mode.
                  After probing the psu I have 3.49v and for 1 second I have at least 2 12.3v lines active the fusion chip gets warm in that second the led turns on and then the 12v lines start losing power...
                  07-23-2025, 01:20 PM
                • toddw65
                  Sanyo DP5834 - Gray Screen
                  by toddw65
                  Hey All,

                  I have a Sanyo DP5834 that did have an issue with the backlights, but I disassembled the unit and repaired the LED strips by resoldering all of the connectors. Now I've reassembled it and I have backlights and sound, but a grayish screen. I can tap on the screen and see that it's on, but no picture. All voltages seem to be correct on the power board.

                  Based on the LCD Flat panel TV troubleshooting guide by Bud Martin, I'm thinking the T-Con has failed because I'm getting 12v both into and out of FP1 on the T-Con. Am I on the right track?

                  Thanks,...
                  5 Photos
                  10-31-2024, 10:37 AM
                • AppleLover123
                  Acer Nitro 5 comes on then goes off
                  by AppleLover123
                  Hey guys,

                  i've got this laptop from a friend who gave it to me in a dead state.


                  The laptop wasn't working at all so i've began my search on the 19V power rail.
                  It was shorted to ground so i injected voltage and the only thing getting hot was my ground clip from my power supply.
                  I found that the +1.05V Rail for the Chipset was shorted. i removed the coil and it was shorted on the power delivery side.
                  The pch seems fine bc the rail has over 50 ohms after i removed the coil.

                  Still nothing was getting hot so i suggested the chip must...
                  10-09-2025, 04:51 PM
                • Loading...
                • No more items.
                Working...