I have a lg 47lg-50ug lcd tv . At first the tv starting bliking function not available and none of the control buttons on the remote or on the side worked . I replaced the main board . Seemed to be ok for a few weeks . Then it started turning itself on . Now the FNAVailble light is back on and none of the buttons work again . But ocasionally the bliking stops and everything works . Seems to happen more on a rainy day . Can anyone help . Or should i be calling a priest ?
-
Hello all, Aiwa TX-110 Tuner got out of storage and the buttons was held in by some gloop, What glue would you use to restick these buttons (they are no snapped off)
Thank you -
Hello, experts! I have a weird issue I've never seen before. I know some of you have definitely seen this. I think some have seen in. I'd greatly appreciate any advice you can give me.
I bought a E241i-a1 to use as a monitor. It powers on, displays the image, and has sound. I just can't get the OSD to go away. The TV doesn't respond to any input from the remote contol or buttons except for the power button. Is this a firmware issue? I can't access settings to reset it. A quick search for the firmware has no results. I'm lost. Please throw some ideas at me.
Thanks for... -
Someone previously had damaged a couple of the push buttons who has whilst pushing them in pushed off a smd resistor from a JVC 40" LED TV LT-40C550 main board MSDV3255-ZC01.
The missing resistor off the push control buttons TV3024-ZC10-01(C) pcb is R06 see the pictures.
I have tried downloading manuals for the Haier manufactured main board however they don't include the schematic for the push buttons!
So if anyone has the pcb that could measure the resistance or have a schematic diagram for it would be much appreciated.
Thanks
...
-
Looking for DURABLE, high quality mouse switches for the buttons, and a scroll switch button so I don't have to buy a new mouse every year or so. (Redragon M688-1). Anyone know a good supplier?
... -
I have a Sharp LC-40LE431U TV. The symptoms are when plugged in, the control buttons on the right side panel don't seem to want to work correctly. I get a solid red light. But when I press the Power button, it does not power on immediately. I have to keep pressing ALL the side buttons randomly until finally the solid green light is on. Then when pressing each additional button, they do not always respond correctly, if at all. Pressing the Volume button might bring up the Menu, or vise versa. Even if I can get the Menu screen to come up and scroll through the selections, I still cannot select any...