LG 42LH3000 Faint panel on side of screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Daz wilde
    New Member
    • Dec 2013
    • 5
    • UK
    #1

    LG 42LH3000 Faint panel on side of screen

    Hi Guys!

    Firstly im a newbie so go easy....

    Last night my LG LCD tv decided to have a faint panel on the left hand side of the screen. It does start to flicker intermittently on the panel which is faint also.

    I've been told it could be the tcon board but if its the panel then its scrap....

    Has anyone any ideas.... Ive attached a pic so you can see.

    Any help is much appreciated!
    Attached Files
    Last edited by Daz wilde; 12-03-2013, 04:50 AM.
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: LG 42LH3000 Faint panel on side of screen

      Common issue on these is panel tab bonds.
      http://www.youtube.com/watch?v=purk_SyiT44

      Different fault same root cause.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • Daz wilde
          New Member
          • Dec 2013
          • 5
          • UK
          #3
          Re: LG 42LH3000 Faint panel on side of screen

          Originally posted by tom66
          Common issue on these is panel tab bonds.
          http://www.youtube.com/watch?v=purk_SyiT44

          Different fault same root cause.

          Thanks tom, looks pretty straightforward to fix.... is there anything else i need to know when attempting this repair?

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: LG 42LH3000 Faint panel on side of screen

              The repair rate is only around 80%.
              Be extremely careful around the panel. One crack and game over.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • Daz wilde
                  New Member
                  • Dec 2013
                  • 5
                  • UK
                  #5
                  Re: LG 42LH3000 Faint panel on side of screen

                  Ah right I'll be extremely careful last thing I want is the whole thing to go

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Ryan.man
                      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                      by Ryan.man
                      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                      02-04-2025, 12:23 PM
                    • x_orange90_x
                      TCL 50S535 bad tcon or panel issue?
                      by x_orange90_x
                      Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
                      03-29-2025, 11:02 PM
                    • ravi_1617
                      HCL Laptop SCREEN SIZE SHRINK LEFT SIDE AROUND 2 INCHES
                      by ravi_1617
                      Hello to all ,
                      I have this HCL ME LAPTOP K 41 ,screen image is shrieked clock /speaker left side approx. 2 inches .Its 14.1 LCD SCREEN. I have replaced lcd screen ,found no difference
                      Its blank that area blank and bottom of Task bar is rolled at bottom displaying top portion image . In bios /setup also getting same problem
                      on external VGA port image is perfect /normal , Attached image...
                      07-25-2025, 12:07 AM
                    • reformatt
                      Macbook Air M2 A2681 Kernel panics after screen replacement
                      by reformatt
                      Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                      It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                      07-31-2025, 08:37 PM
                    • smic717394
                      iphone XS turns off when press on screen.
                      by smic717394
                      Hi,

                      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                      07-25-2024, 10:16 AM
                    • Loading...
                    • No more items.
                    Working...