Bush idlcd32tv22hd

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • anotherdude
    Badcaps Veteran
    • Feb 2013
    • 488
    • uk
    #1

    Bush idlcd32tv22hd

    Just picked up this bush tv guy said it sometimes turns on then other times it doesn't and the standby light goes off

    It powered on when i got there and now the standby light goes off after a few seconds

    so assuming it's a 5v stby problem, bad caps maybe?
    Last edited by anotherdude; 12-01-2013, 12:17 PM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • ChristianBr01
      LED TV Samsung The Frame 55 inch QE55LS03RAU Standby Light only
      by ChristianBr01
      Hello everyone,
      I got a Samsung The Frame 55 inch TV for free from uncle cause it is not turning on anymore. I am in the second year of training as an electrician so I have knowledge already but I am far away from to be a pro.
      The TV has Standby but ist not turning on. A Friend of mine owns a 50 inch Frame TV so I checked the One Connect Box and the One Connect Cable there. Both are good and working normally. I have opened the TV case and measured some voltages on the Board.
      What I already found is that the 12.8V are not an the connector to the main board connector to the power...
      04-23-2025, 01:48 AM
    • SkishyIshy
      Sony Bravia XBR-65x900f: No Power, No Standby-light - however 3.3v STBY is present
      by SkishyIshy
      Hey All,

      I have a Sony 65x900f that I purchased cheap because of a no-power issue.
      I assumed that because there is no standby light visible, it would be an easy fix - however upon opening up of the unit I can confirm that the 3v3 standby voltage is making it's way from the power supply to the main board. I'm a little confused as to why there is no standby light.

      I am firstly wondering if anyone has this model of TV, or has worked on one and can give me some insight. I have tried to find a service manual for this model, to no avail - and would really appreciate...
      03-17-2021, 11:44 AM
    • brithepi2k
      Sony KD-65XE8596 no standby light
      by brithepi2k
      Hi,

      I’ve got a Sony KD-65XE8596 here that has no standby light coming on. I’ve tested the power board with the test meter, the TV needs 3.4 for the standby but only getting 2.4. Anything that I can change/check on the board to get it working? Pictures of the board are included.

      cheers...
      5 Photos
      09-06-2025, 02:22 PM
    • AleMonti
      LG 55EG910V - no power and no standby light
      by AleMonti
      Hi everyone,
      I'm trying to troubleshoot and repair this old LG OLED curved TV, model 55EG910V.
      I did some basic troubleshooting and reviewed most related posts here, but I wasn't able to isolate the issue.

      The TV shut itself off during playback and never came back to life - the standby light remains off. My dad claims that it has happened a few times in the past but the issue resolved itself after some time. Not this one.

      After checking the basics I did the following:
      • I measured all voltages and as expected the only active supply is the 3.5V standby. It
      ...
      11-04-2024, 05:02 PM
    • Kaar3l
      Samsung QLED QE65Q7FNAT only standby light
      by Kaar3l
      TV: Samsung QLED QE65Q7FNAT
      PSU: BN4400940A
      MB: BN94-12832K

      I got the tv in spring 2024. At that time it started, then ran 60 sec and poweroff. Seemed like reboot issue. I didn't have time and room to check it in summer so I plugged it in and now the standby light is on. I press button on remote, standby light goes off and tries to start?. No picture or backlight on LCD. I thought about removing diodes like in this thread: https://www.badcaps.net/forum/troubl...sung-qled-q60r...
      09-24-2024, 01:35 PM
    • Loading...
    • No more items.
    Working...