sourcing parts for logik lcd

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mikcle60
    Member
    • Nov 2013
    • 11
    • Scotland
    #1

    sourcing parts for logik lcd

    Hello all I got a logik 19" e19/13b-gb- tc -uk that had 2 seconds to black and I have traced the problem to one of the inverters on the inverter board, I have been trying to find a replacement using the number on the inverter but with no luck!! can anyone shed any light? thanks




    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: sourcing parts for logik lcd

      There's an inverter on eBay for £20.
      http://www.ebay.co.uk/itm/22-LOGIK-L...item3f2af64a26

      Beware, quite a few small LCD panels made by Samsung and ChiMei have issues with the bulbs going bad in panel. This would give same effect as a bad inverter.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • mikcle60
          Member
          • Nov 2013
          • 11
          • Scotland
          #3
          Re: sourcing parts for logik lcd

          Thanks, I seen that inverter was looking to replace the actual inverter/transformer component to try and keep costs down but I cant find one! I checked both resistances on the inverters and one was ok and one wasn't so thought it must be faulty!!

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: sourcing parts for logik lcd

              To be honest the transformer replacement is likely to be around £10 to £15 so you're not saving much. Keep the old board for spares.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • mariushm
                  Badcaps Legend
                  • May 2011
                  • 3799
                  #5
                  Re: sourcing parts for logik lcd

                  You can buy universal inverters for about 10-15$ including shipping:

                  http://www.ebay.co.uk/itm/Universal-...item51b59035eb

                  http://www.ebay.co.uk/itm/Universal-...item2ecbd6f240


                  I have two or three of these in my box of spare parts and they work fine.

                    Comment

                    • mikcle60
                      Member
                      • Nov 2013
                      • 11
                      • Scotland
                      #6
                      Re: sourcing parts for logik lcd

                      Ah well I guess there's not much point in replacing the component if I can get the board for that price, thanks for the info folks

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Dreadnought
                          Logik L40DIGB20 inverter SSI 400 14A0
                          by Dreadnought
                          Hi. Sorry if I have posted this twice, the first thread showed an envelope with a return arrow, leading me to think I'd tried to post too soon after my introductory post. Secondly I apologise if I break any forum rules/manners, as I'm new here. I've used badcaps for advice in the past, but I've only just joined. I'm self taught, so I don't have anywhere near the knowledge that some of you guys have, but I can only hope to keep learning and get there one day.
                          Anyway, I've been working on a TV recently. It's the one listed in the title. Logik L40DIGB20. It powers on fine, with the standby...
                          02-09-2021, 03:31 PM
                        • Dreadnought
                          L40DIGB20 Logik 40" inverter/backlight issue.
                          by Dreadnought
                          Hi. Firstly I apologise if I break any forum unwritten rules, as I'm new here. I've used badcaps for advice in the past, but I've only just joined. I'm self taught, so I don't have anywhere near the knowledge that some of you guys have, but I can only hope to keep learning and get there one day.
                          Anyway, I've been working on a TV recently. It's the one listed in the title. Logik L40DIGB20. It powers on fine, with the standby light turning blue as it should. The backlight turns on for a second, then goes off. Using a flashlight, I can see an image on the screen. The power supply is fine,...
                          02-08-2021, 12:28 PM
                        • x_orange90_x
                          Vizio E55-E1 bad backlights or bad inverter?
                          by x_orange90_x
                          I just got this tv today and it appeared to have no backlight on. After taking off the rear cover and checking again in the dark I can see that MAYBE one quadrant is lit.. But still it's quite dim. I was going to check the LEDs with my tester, and I found LED 1 and LED 2 + pins on the wire from the inverter, but I couldn't identify a ground. Nonetheless I tried using a mounting screw on the inverter board and also the chassis as ground but regardless my tester reads 300 which is what it reads when there is no voltage draw.

                          I don't know how exactly to test the inverter itself. Is it...
                          01-29-2025, 09:24 PM
                        • Mark D
                          Samsung UN65JU67ODFXZA Version TD01 Schematic and Parts List
                          by Mark D
                          The TV is a Samsung UN65JU67ODFXZA Version TD01. I replaced the power source board and the TV is now working, but I decided to try and troubleshoot the old board to fix at the component level. Trying to get a schematic and a parts list has proven to be an issue. Trying on my own, I can't tell you how many times my Norton security has flagged sites as "malicious". I ordered a service manual from ServiceManuals.net, paid $16.99 and got 66 pages of everything BUT schematics and component parts list! Can anyone steer me in the right direction? Some of the surface mounted component parts...
                          10-29-2024, 03:15 PM
                        • lostone
                          Looking for help with a Viewsonic VP230mb where the backlight comes on only momentarily
                          by lostone
                          Hello, I came here after finding some similar questions asked on other monitors and hope someone here can help me get an ancient Viewsonic VP230mp (23" 4:3 LCD) back to working condition.

                          First a little background, I have a background in computer and electrical engineering, and I'm smart enough to know I know nothing about LCD displays and how they work. For this topic I'm as green as they come.
                          When the display is turned on the viewsonic logo displays in the uppper left for 2 seconds then the screen goes black, the power LED is green (on) and when a computer is connected...
                          05-19-2024, 11:40 AM
                        • Loading...
                        • No more items.
                        Working...