Maxent MX-50X5 screen flickers breifly

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • high-tech
    Senior Member
    • Sep 2010
    • 197
    • USA
    #1

    Maxent MX-50X5 screen flickers breifly

    Hi fellas, I got this 50 inch maxent plasma television and the screen won't stay on... My friend says he could still hear sound and the power stays on.

    So I checked the va and vs voltages and noticed vs was low at 190 volts so I brought it up to 196 and va was ok at 60 volts. didn't change anything so I'm thinking I may have y-sus and or buffer issues. I noticed when the screen does come on briefly it is fully lit without any horizontal black stripes which to me without testing buffers for shorts means the buffers are probably ok.

    Help diagnosing this would be appreciated, I don't have much knowledge on these plasma televisions
    Tags: None
    • high-tech
      Senior Member
      • Sep 2010
      • 197
      • USA
      #2
      Re: Maxent MX-50X5 screen flickers breifly

      I forgot to upload pics so here they are...
      Attached Files

        Comment

        • high-tech
          Senior Member
          • Sep 2010
          • 197
          • USA
          #3
          Re: Maxent MX-50X5 screen flickers breifly

          SUS boards and buffers
          Attached Files

            Comment

            • high-tech
              Senior Member
              • Sep 2010
              • 197
              • USA
              #4
              Re: Maxent MX-50X5 screen flickers breifly

              Help Please, if this is not enough info, ask and I can do

                Comment

                • ed jones
                  New Member
                  • May 2016
                  • 2
                  • usa
                  #5
                  Re: Maxent MX-50X5 screen flickers breifly

                  i'm leaning toward the y-sustaian board

                    Comment

                    • cliff_hootarski
                      Badcaps Veteran
                      • Jul 2006
                      • 411
                      • USA
                      #6
                      Re: Maxent MX-50X5 screen flickers breifly

                      If you could get the test patterns going, you could narrow it down a bit. It uses LG parts and I've looked at a picture of the control board, but I could not find the "test pattern" pins to short. That's about as much advise I can give.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Ryan.man
                          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                          by Ryan.man
                          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                          02-04-2025, 12:23 PM
                        • reformatt
                          Macbook Air M2 A2681 Kernel panics after screen replacement
                          by reformatt
                          Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                          It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                          07-31-2025, 08:37 PM
                        • smic717394
                          iphone XS turns off when press on screen.
                          by smic717394
                          Hi,

                          I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                          07-25-2024, 10:16 AM
                        • aaabddoo
                          Dell 3520 intel vga error when i instel vga intel driver The screen flickers need help pls
                          by aaabddoo
                          Dell Precision 3520​ intel vga error when Run the programl vga intel driver The screen flickers need help pls

                          Sorry for the language
                          06-15-2025, 02:42 PM
                        • Capacitorial
                          Philips 46PFL8007K/12 - Picuture flickers on half of the screen
                          by Capacitorial
                          Hello guys.

                          I recently got a TV that has the following problems:
                          1. Sometimes it has to be turned on and off a few times, to boot up. Sometimes it starts from the first try
                          2. When it is running normally, the right side of the screen flickers. Sometimes it is just a square of transparent white maybe a 1/3 of the right half (top right)
                          3. The flicker is also sometimes a square that is filled with lines
                          4. I noticed that when the TV brightness is set to max, it flickers less. I think the Standard setting is the worst where it comes more frequent
                          5. When it runs a few minutes it gets better,
                          ...
                          12-17-2023, 11:11 AM
                        • Loading...
                        • No more items.
                        Working...