Did not help me before and I hope you help me following time

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • allaoua barika
    Member
    • Dec 2012
    • 18
    • algeria

    #1

    Did not help me before and I hope you help me following time

    Please help me I have a problem in the motherboard bn41-01726b I want schemat for her please
  • mariushm
    Badcaps Legend
    • May 2011
    • 3799

    #2
    Re: Did not help me before and I hope you help me following time

    If you want to be helped, you have to write in ENGLISH.

    Also, it would help if you would USE A PROPER TITLE FOR YOUR THREADS.

    A lot of persons here will only check threads if they're related to something they're good at (monitors for example), so a thread with the title "help me please" or "did not help me before" will be ignored.

    Next, it would help if you would actually give as many details as possible. Like...

    What product uses that motherboard?
    Who makes that motherboard (if you know) ?
    What problem do you have with that motherboard (some people may give you tip about what fails often on that motherboard) ?

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #3
      Re: Did not help me before and I hope you help me following time

      If you have this monitor and it has NO SIGNAL problem constantly, the fix is to upgrade the monitor's firmware using the update utility provided by Samsung. Schematics for this board will most likely not be available.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • kc8adu
        Super Moderator
        • Nov 2003
        • 8832
        • U.S.A!

        #4
        Re: Did not help me before and I hope you help me following time

        yes its the same old post relevent info and pics if you want help thing.
        start with brand and model/symptom in title.
        also note that many units never have had and never will have a schematic available.

        Comment

        • tw2005
          Badcaps Legend
          • Oct 2011
          • 6458
          • Australia

          #5
          Re: Did not help me before and I hope you help me following time

          I see plenty of attempts of solid help here.

          https://www.badcaps.net/forum/showthread.php?t=24721

          Comment

          • allaoua barika
            Member
            • Dec 2012
            • 18
            • algeria

            #6
            Re: Did not help me before and I hope you help me following time

            je cherche le schemat dalimentation

            Comment

            • allaoua barika
              Member
              • Dec 2012
              • 18
              • algeria

              #7
              Re: Did not help me before and I hope you help me following time

              Hello Please help my computer screen Samsung motherboard bn41-01726b
              Look for schemat
              Samsung s22a100n main unit bn41-01726b

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: Did not help me before and I hope you help me following time

                Oh dear, I am guessing you made no attempt to read what any of us wrote.
                You probably will not find a schematic for it, most likely it will have never been published!
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                Related Topics

                Collapse

                • titomno2
                  Gaming Laptop Zephyrus S17 TFT not detected every time !
                  by titomno2
                  Hi guys,
                  I post my problem here because I think it could be a capacitor related issue (Asus support on this particular subject is non-existing).
                  So the computer is a Zephyrus-S17-GX735LXS-26T and the strange behavior is seen.
                  On cold start most of the time the internal screen is detected and a picture it works fine until shutdown, sleep or deep sleep.
                  Then the screen won't work for a long period of time.
                  If I wait 1 or 2 hours it work again most of the time.
                  When it doesn't work the batterie indicator blink 3 times white stop and the same schematic is repeated...
                  01-19-2025, 08:27 AM
                • flat-earther
                  Adding a clock battery to action camera to retain date&time when changing batteries Campark X25
                  by flat-earther
                  I have a cheap action camera with an annoying trait, every time I change batteries the date & time gets reset and I have to set it again.

                  To solve this problem I want to add a small internal battery inside it which will keep supplying power to the camera for a while while I change batteries so the date & time is retained.

                  I have opened the camera and I think there is enough room to add something inside to accomplish this:

                  The camera is powered by a 3.7V nominal single cell lithium ion battery.
                  So I need to connect another battery in...
                  06-08-2025, 02:00 AM
                • OscarAV
                  HP Pavilion dm4-1065dx long time to get the power led on
                  by OscarAV
                  Hello,

                  I just came here to see if someone has had the same problem I have, and if he or she solved It, to know how to do It.

                  I have made a quick search for my laptop but I have not seen anything similar.

                  I have an old laptop, an HP Pavilion dm4-1065dx which takes a lot of time to be ready to start if the laptop has been unplugged for a while. It has no battery. The battery failed long time ago. It needs to be plugged to work. But as I said, It can take a lot of time until the charging led gets on, and I can switch on the laptop. I am using an external monitor...
                  09-23-2024, 05:53 PM
                • BigOof
                  Pioneer RM-07 Active monitors cutting out from time to time
                  by BigOof
                  I have a pair of Pioneer RM-07 monitors that I bought a while ago. When I was testing them I noticed that one speaker would cut out and I thought it was just a bad cable connection. At the price they were being sold for I was willing to take a risk on them. However, 6 months later and the one monitor still has the same issue. Most of the time it works, but there are times that the power LED is on but I get absolutely no sound. I can hear the relay clicking on/off sometimes and then it will/won't work depending on what it feels like. I've tried XLR and RCA inputs with the same issue. There's no...
                  12-18-2024, 04:35 AM
                • nieljosiah
                  HP Notebook - 15-ba017ax (LA-D711P Motherboard) turns off randomly after some time
                  by nieljosiah
                  I've had this laptop for 8-9 years, and about a week back, it started malfunctioning. When I press the power button, the power LED comes on for about 5secs and turns off. The fan also doesn't spin at all during this time. But, if I press the power button, and then manually spin the fan, the laptop boots up and the fan starts spinning on its own. Even if I do this, and the laptop boots up, it turns off (hard shutdown) after some time between 10secs and 1hour randomly. I've tried checking the fan voltage and it's at zero volts when I press the power button without spinning it, but when I spin the...
                  08-17-2024, 02:19 AM
                • Loading...
                • No more items.
                Working...