LG 50PQ30 Heatsinks

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK
    #41
    Re: LG 50PQ30 Heatsinks

    If control board is shutting down it won't send signal to either so no heat will be produced, also, if the panel is not lit, no heat either as no substantial current is being pumped into it.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • pposey
        Senior Member
        • Oct 2012
        • 60
        • USA
        #42
        Re: LG 50PQ30 Heatsinks

        Originally posted by tom66
        If control board is shutting down it won't send signal to either so no heat will be produced, also, if the panel is not lit, no heat either as no substantial current is being pumped into it.
        So are you saying that the Z-sus is shutting down the control board or is it possible the control board is faulty as well?

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK
            #43
            Re: LG 50PQ30 Heatsinks

            I suspect the control board is detecting a fault in either Y- or Z-sustain and shutting the sustain process down.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • pposey
                Senior Member
                • Oct 2012
                • 60
                • USA
                #44
                Re: LG 50PQ30 Heatsinks

                ok im about to give up on this thing. I have replaced the y and z sustain and also the control board. The control board now has a light on it blinking but still no picture. Also where before i was getting actually sound out of it, it is no a static sound and i tried changing the input to no avail. Would anybody have a idea on what it could be? This is really frustrating but i do not like anything defeating me lol

                  Comment

                  • pposey
                    Senior Member
                    • Oct 2012
                    • 60
                    • USA
                    #45
                    Re: LG 50PQ30 Heatsinks

                    Any ideas anybody? I really don't wanna dump this TV.

                      Comment

                      • pposey
                        Senior Member
                        • Oct 2012
                        • 60
                        • USA
                        #46
                        Re: LG 50PQ30 Heatsinks

                        Originally posted by pposey
                        Any ideas anybody? I really don't wanna dump this TV.
                        Found the problem! Bottom y buffer board! Thanks for your help!

                          Comment

                          • pposey
                            Senior Member
                            • Oct 2012
                            • 60
                            • USA
                            #47
                            Re: LG 50PQ30 Heatsinks

                            Originally posted by pposey
                            Found the problem! Bottom y buffer board! Thanks for your help!
                            I have one quick question though. When i removed the bad board the upper board would show a picture but it has vertical red and black lines. Is that normal when the other one is removed?

                              Comment

                              Previous 1 2 3 template Next

                              Related Topics

                              Collapse
                              • legg
                                LG 42PC3 buffer output doesn't follow YSUS
                                by legg
                                LG42PC3D -UD originally with green lamp but no display or audio.
                                Owner says was working, then went 'pop'.
                                All 5V caps bulging. replaced.
                                All PSU output voltages within spec but -Vy is low on YSUS.
                                One of three parallel fets between SUS_OUT and SUS_DN is zenering,
                                eventually shorts DG. Replaced all 3 - -Vy now OK.

                                Y scan buffer test point does not follow YSUS output below -50V

                                Note: This unit seems to expect YSUS output to park at -Vy in between
                                drive signal pattern periods. A replacement drive signal board confirms this....
                                11-18-2021, 11:49 AM
                              • Truncatedhose
                                Help repair this relic? Philips 42PF7220A/37, pulsing buzz from YSUS
                                by Truncatedhose
                                Greetings all!

                                Originally this set had the usual messed up video symptoms such as: horizontal lines, weak, grainy video, bottom and top of picture differ in intensity of problem. It also seemed to slow to turn on or show the messed up picture.

                                Seemed like must be YScan/buffer board failure. Ordered buffer boards from my distributor which were supposed to be original/new and also from another distributor, I ordered the YSUS because I wanted to replace it for preventative maintenance. (also, the YSUS had a bulged cap, so there was even more reason to suspect it could...
                                07-04-2018, 10:59 AM
                              • zwarder
                                eax61319402 50PJ350 YSUS
                                by zwarder
                                Hi
                                Had shorted YSUS

                                Q24 RPJ63F3
                                C726 cap
                                Q11 K3667
                                R528 & R529 2.2 ohm

                                replaced all of these but still trips psu VS & VA are a bit low when ysus disconnected. IC301 does look a bit burnt however

                                ZSUS is also good as far as I can tell

                                Anyone could help me out on this one
                                10-23-2023, 08:11 AM
                              • maces
                                LG 60PH6608 YSUS repair
                                by maces
                                Hello all,

                                I have a problem with my LG 60PH6608. The TV is only clicking and doesn't get started.
                                I checked the power supply and measured that the 200V is shorted at the YSUS board.
                                All IGBTs, the MOSFET K8A60DA and the diode D603 are shorten.
                                So I replaced the parts. I checked the further parts for shorts and I was pretty sure that there is no further problem on the board.
                                So I plugged it in. Directly, resistor R251 (2,2 Ohm) blowed out with a little spark. Immediately I disconnected the TV from supply.
                                I checked the replaced parts (IGBTs, MOSFET...
                                12-11-2022, 02:21 AM
                              • Uranium-235
                                Money for scrap computers and copper heatsinks
                                by Uranium-235
                                Has anyone ever gone down this road? I have a number of copper (and copper plated :/ ) and aluminum heatsinks. As well as full computers. Ever heard of any companies that will buy them off me (for not that much probably). I've been sending them to e-recycling

                                I kept a beige taaaaall antec case, going to try TC's yellowing remover and try to create an old system. Probably multiboot with DOS and 98 and 2k to cover all my bases

                                Maybe even use a certain Voodoo5 card in it
                                10-09-2022, 01:44 AM
                              • Loading...
                              • No more items.
                              Working...