Announcement

Collapse
No announcement yet.

Lnt4661fx

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Lnt4661fx

    I have a Samsung LNT4661FX lcd tv with an over brightness problem. I adjusted the brightness and contrast with no change . Is someone famillar with this problem.

    Thanks for any replys

    #2
    Re: Lnt4661fx

    Have a pic? Right off the bat I would say tcon issue. But . There are other checks that can be done..
    Did I leave the soldering iron on?

    Comment


      #3
      Re: Lnt4661fx

      Could be gamma IC on t-con board or bad EEPROM settings.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment


        #4
        Re: Lnt4661fx

        thanks for the reply guys i was thinking that it might be the t con, but not shure forgot to say that the screen will sometimes just pop back up perfect then go out again is this also common for this with the t-con. thanks again

        Comment


          #5
          Re: Lnt4661fx

          That sounds more like a panel issue, probably tab bonds. May or may not be repairable.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment


            #6
            Re: Lnt4661fx

            ok thanks

            Comment

            Working...