10uf 400v inplace of 10uf 450v is it bad

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wreksta
    Badcaps Veteran
    • Aug 2013
    • 508
    • england
    #1

    10uf 400v inplace of 10uf 450v is it bad

    As the title says can i do this just for testing purposes

    bush idlcdtv32hd oned of the caps has blown

    want to try a 400v 10uf as it al i have
    but the 10uf 450v is a lot bigger than the 400v
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: 10uf 400v inplace of 10uf 450v is it bad

      Bad idea -- cap can be exposed to in excess of 400V on start up. It will probably work fine for a few days before failing.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • wreksta
          Badcaps Veteran
          • Aug 2013
          • 508
          • england
          #3
          Re: 10uf 400v inplace of 10uf 450v is it bad

          Thats all i want to test tom that it runs then i can go to the shack and get some correct values

            Comment

            • shovenose
              Send Doge Memes
              • Aug 2010
              • 6575
              • USA
              #4
              Re: 10uf 400v inplace of 10uf 450v is it bad

              You can use it for a quick test but get the right cap in there ASAP.

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK
                  #5
                  Re: 10uf 400v inplace of 10uf 450v is it bad

                  I had the 26" and 32" of this model with 400V replacements (they had been replaced before) and both had failed.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • FlailingEngineer
                      Help with Bush Tv (Vestel 17mb95m Mainboard)
                      by FlailingEngineer
                      Hi, I was recently given a Bush Smart TV by a friend and the main board seems to be hanging on by a thread.

                      Before we get to that, my first obstacle was figuring out the model number since the back sticker has gone for a walk. Upon taking off the back case, I noticed the following Vestel parts, 17MB95m mainboard, 17IPS71 (what I'd assume is power supply) and a VES420UNVL-3D-S02 display panel. After doing some research I think the TV I have is a Bush ELED42240FHDCNTD3D, based on the matching image here (https://www.manualslib.com/manual/11...td3d.html#manu...
                      05-31-2023, 06:52 AM
                    • blero
                      Repairing cheap chinese Led bulbs
                      by blero
                      Hello,

                      I'd like to try to repair these corncob shaped chinese bulbs with tens of Leds on them.

                      I know they're bad quality and fail fast, because of the Leds or the capacitor(s).
                      So I plan to try to replace the main capacitor 15uF-400V with a good quality one.

                      I've used in the past some capacitors of this eBay vendor which is well known on this site: egekecu. I'm still daily using a monitor I repaired with his products.
                      I know it has been said he sells good and real brands but outdated capacitors. He's actually 3 times cheaper than RS-Online...
                      01-31-2021, 07:06 PM
                    • tyler123456
                      Need help identifying an IC chip on a Bush DAB radio (BD-1801)
                      by tyler123456
                      Hi,

                      Not sure whether anyone can help but I'm trying to identify the IC chip in the photo below.

                      I purchased a faulty Bush DAB radio (model # BD-1801) and identified that an IC chip was blown on it. Unfortunately, I couldn't read the manufacturer name / model number of the IC chip.

                      I purchased another (working) BD-1801 so that I could open it up to find out the IC details - but the IC chip details are missing (as you can see in the photo.)

                      Given the two huge blobs of solder either side of it I'm guessing it regulates power(?)

                      Anyone...
                      1 Photo
                      08-16-2024, 12:51 PM
                    • slybunda
                      Elite Capacitors? (450v 47uf power board Toshiba Vestel TV)
                      by slybunda
                      anyone heard of these caps before? at first glance i mistook them to be Elna caps but closer look and it was elite. not sure if they are known failure prone brand.
                      also they are 47uf and 450v. why are they so large in height? i can get replacement 450v 47uf caps that are a quarter the height. what am i missing here?

                      if i were to replace them what should i be looking for?

                      they are on the power board of a toshiba (vestel) tv power board.
                      pic attached...
                      11-13-2023, 06:33 AM
                    • chth96
                      How Can I test PWM DM0365R?
                      by chth96
                      Hello
                      I have power adaptor(220V/input, 12V 1.2A/output) which has symptom of fluctuating output DC voltage between 11.5V-12.2V.
                      So I opened its plastic case and when switched it on, I heard constant tik tik sound from inside its PCB.
                      I measured DC voltage between negative and positive pin of the largest capacitor(400v 10uf) and it was measured contant 300V.
                      I also measured ESR value of all capacitors and I noticed that one of capacitor(KMG 16v 470uf), which located in the secondary side, have high ESR value(10 ohm),So I replaced it with same specification NXH capacitor....
                      06-18-2025, 04:14 PM
                    • Loading...
                    • No more items.
                    Working...