Panasonic TC-L47E5 LED TV blinking red power light PLEASE HELP
Collapse
X
-
-
Re: Panasonic TC-L47E5 LED TV blinking red power light PLEASE HELP
A fuse should show as shorted.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Comment
-
Re: Panasonic TC-L47E5 LED TV blinking red power light PLEASE HELP
That is shorted, you can use that one then.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic TC-L47E5 LED TV blinking red power light PLEASE HELP
Ok great. Wow that was the hardest set I have ever worked on. Thank you so much Tom. I could have not done it without you. I would have just put more money into it for a Main and still have the same issue. Thank you.Comment
-
Re: Panasonic TC-L47E5 LED TV blinking red power light PLEASE HELP
The root cause was surprisingly simple though, I was too expecting an A-board fault.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic TC-L47E5 LED TV blinking red power light PLEASE HELP
Yeah no kidding. It was the first board I purchased a new LED driver. So I was right from the beginning what I didn't know is that it took the PSU with it.Comment
-
Re: Panasonic TC-L47E5 LED TV blinking red power light PLEASE HELP
And it sure is troubling when you can't trust a board you buy from a supplier, like the P board.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Comment
Related Topics
Collapse
-
by clooI recently got my hands on a 60" Panasonic P60ZT60 plasma tv (european model) that has some strange issues along with an 8 blink code.
It know this tv is getting old but it was once considered one of the best plasmas ever made, and i think it is still holds on to that even by todays standards.
So, long story short. When i first got the tv it had a very bright washed out picture with very raised blacks in all picture modes and i couldn't find the cause in the picture setting menus.
After doing a factory reset this problem was gone and the picture was back to...01-06-2025, 06:02 AM -
by ItepKHey everyone!
I've gotten this TV for free, neither have it seen a TV repair man, neither have it been opened before.
This post describes my entire troubleshooting process of this TV.
When I turn it on using the ON/OFF switch at the side of the TV, the light rapidly flashes green, then it stays on, but it does not react to any of the remote buttons, side buttons, and doesn't play audio.
I've taken the unit apart, and I've started to check some voltages:
- On the P11 connector, there is 15V DC only for a brief moment, then it goes
-
by YasaChHello...
my tv almost 2 years not powerd on and when i turned it on nothing happened and only 3 red light keeps blinking
i opened the back cover no sign of damage on the powery suply or motherboard
when i plug in the power i hear the reley sound like tik first and another tik..after that only red keep blinking..
another thing is even after i unplugged the power, The tv keeps red blinking 3 times for 2 almost 2 munites2 Photos -
by VebririonHi everyone,
I'm new here and trying to repair my Panasonic TX-P50V10E plasma TV, which is currently showing the 6 red blink error code.
Just for context: I'm used to building PCs and installing modchips in old consoles, but this is my first time trying to fix a TV. I'm French, and while my English is okay, I'm using ChatGPT to help translate and clarify my messages as much as possible — so please forgive any odd phrasing.
I'm also not very experienced with using a multimeter, but I'm very motivated and ready to follow instructions carefully and report... -
by Fergal22Hi,
I have the above tv that just shows a red light blinking twice 5 times, i have taken the back off and all the capacitors seem ok,
When i disconnect the mainboard from the PSU all the led's light up blinking fast but as soon as i reconnect the mainboard back to the power supply i get the red light blinking again twice 5 times,
I have attached pictures of the Mainboard, PSU and a small video (zipped) showing what happens when i disconnect the lead from the psu
Any help would be appreciated... - Loading...
- No more items.
Comment