Plasma turns on, but shows no picture

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Daysleeper
    Member
    • Aug 2013
    • 23
    • Germany
    #41
    Re: Plasma turns on, but shows no picture

    Yeah, that's the article I've read, but I can't find the jumpers to be shortened on my board.

    I was thinking of the mainboard, because of the fact, that the TV wouldn't wake up from standby after it's in there for a while (have to pull the power plug) and the fact that it gives a screwed up picture on some VGA and RGB-Scart sources. Though the 2nd issue could just be a low cost, incompatible internal upscaler...
    Last edited by Daysleeper; 08-10-2013, 04:01 AM.

      Comment

      Previous 1 2 3 template Next

      Related Topics

      Collapse
      • KYBOSH
        Hitachi 55HDS69 55" Plasma TV - No Picture But Sound
        by KYBOSH
        Picked up a bahemoth plasma TV not too long ago and just now getting around to looking at it.
        No picture but you hear the TV static (white noise) playing loud and clear.
        The back was already taken off (and no screws were provided) as the previous owner had already taken a look.
        But it seems they didn't get too far and just left it.

        When I first took a look I was amazed at how pristine the inside looked.
        Its as if the TV had been in a time capsule.
        Caps looked like they were just pulled off the self.
        Copper coils had no sign of corrosion on...
        02-01-2023, 11:10 PM
      • KYBOSH
        Trying to Save - LG 60PH6700 60-inch plasma HDTV - Powers ON but no picture
        by KYBOSH
        Saved this beast from the landfill this weekend.
        Manfactured July 2013 in Mexico.

        I love working on plasma TVs.
        Its been a while but I was lucky enough to find 2 this week.

        The TV powers on and stays on but no picture. Havent checked for sound yet.
        No bulging caps although the insides are pretty dusty and the boards are discolored from many years of high heat.
        Will start troubleshooting tonight.

        ...
        10-17-2024, 01:17 PM
      • grimreaper420
        Samsung Odyssey G9 (c49g95tssr) no picture or backlight. Power LED shows
        by grimreaper420
        hey guys,

        i bought 2 samsung odyssey g9's for a decent price. they both have the exact same fault. when plugged into a power source, the blue led powerlight shows, but when turned on there is no picture, no backlight, no menu, nothing. when plugged into a laptop the laptop recognises the monitor, but keeps disconnecting and reconnecting.

        dont have any schematics or diagrams unfortunately. any ideas?

        thanks
        09-03-2024, 03:47 AM
      • taslan
        Surface 7 Pro wont boot, shows Logo and immediately turns off
        by taslan
        Hello everyone,
        as stated in the title, my surface 7 pro wont boot anymore.
        When i press the power button it shows the square windows logo for a second and immediately turtns off again.
        I dont even have a chance to get into bios or boot from usb.
        While trying to find help online it was suggested to look for help/repair here on badcaps and it might be a ME Region corruption in bios.
        I dont know what that is exactly, but i never tinkered with the bios or windows in terms of hacking/patching etc.
        Bought it directly from microsoft and used it now and then and only...
        01-16-2025, 01:25 AM
      • Tr0ll
        T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
        by Tr0ll
        Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

        The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

        Original T-con:
        Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

        First replacement T-con:

        I thought it might be t-con and ordered new t-con from china(supposedly tested)...
        10-07-2023, 07:48 PM
      • Loading...
      • No more items.
      Working...