Panasonic TX-P42S11B - 7 Blink Code

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Fool2cool
    replied
    Re: Panasonic TX-P42S11B - 7 Blink Code

    Yeah I did consider that, but I'm also worried that the original fault wasn't the SC board, the fault history is that it fell off a stand and onto the floor, so I'm wondering if it could be something like a shorted panel? I don't want to shell out for an SC board if it does turn out to be that although I might have to.

    Thank you for the quick reply and advice

    Leave a comment:


  • chrishenderson69
    replied
    Re: Panasonic TX-P42S11B - 7 Blink Code

    hi i am only guessing as i have done the same repair but you may have fried the sc board it might be cheaper to buy a replacement about £40 from flattvparts in portsmouth it might be less than what i paid for mine depending on model etc

    Chris

    Leave a comment:


  • Fool2cool
    started a topic Panasonic TX-P42S11B - 7 Blink Code

    Panasonic TX-P42S11B - 7 Blink Code

    Hi all, first real TV repair attempt for me!

    I have this Panasonic plasma tv on my bench that had the 7 blink code problem, I disconnect the SU and SD boards and still had 7 blink codes, I disconnected the SC board and got 6 blink codes.

    And now here's where I messed up big time, I read about testing SC by shorting the SC50 connector with SU and SD disconnected, however I failed to read the part about also removing the VF_GND screws. I promptly turned the TV on and a nice smell of burning greeted me from around the SC50 area.

    Testing SC with SC50 shorted AND the screws removed now causes the SC board to sing some very interesting tunes :/

    Can anyone tell me what components I'm likely to of released the magic smoke from so I can attempt to get back to my original fault

    Thank you
    Chaz

Related Topics

Collapse

  • rmacintosh
    Panasonic Plasma repair - TH-P60GT50 - Dead, 3 blink code
    by rmacintosh
    I aquired this Panasonic 60" plasma around the time my first child was born. It was meant to be a project tv, hoping to fix it chipping away at the repair in my free time. Well that was 2 years ago and i'm really just getting around to making a sincere effort to see if I can ressurect this beast.



    The symptoms of the tv ar as follows:
    • Plug AC in to back of TV
    • After about 2 seconds the relay on the P-sub board will click on and then a fraction of a second later it clicks back off
    • The 3 blink code is given by the power LED
    • If the TV is unplugged and then
    ...
    03-14-2020, 12:24 AM
  • cloo
    Panasonic ZT60 plasma tv with strange behavior and 8 blink code
    by cloo
    I recently got my hands on a 60" Panasonic P60ZT60 plasma tv (european model) that has some strange issues along with an 8 blink code.
    It know this tv is getting old but it was once considered one of the best plasmas ever made, and i think it is still holds on to that even by todays standards.


    So, long story short. When i first got the tv it had a very bright washed out picture with very raised blacks in all picture modes and i couldn't find the cause in the picture setting menus.
    After doing a factory reset this problem was gone and the picture was back to...
    01-06-2025, 06:02 AM
  • LongLiveMyPlasma
    Panasonic TC-P42ST30: Repair for 14 blink code
    by LongLiveMyPlasma
    My beloved Panasonic TC-P42ST30 has been stricken with the 14 blink code.

    I've spent many hours reading through forums, watching YouTube videos and reading the Panasonic plasma troubleshooting guide. But I'm a novice at this, and still need some help to cross the finish line.

    I understand the Panasonic troubleshooting guide suggests that the 14 blink code usually means there's a problem with either P-board or A-board. However, I also learned the problem frequently rests with the SN-board.

    Using my multi-meter, I was able to confirm the P-11 pin on the...
    05-18-2020, 10:48 AM
  • orbit417
    Panasonic Plasma tc-p55vt50 6 blink error code
    by orbit417
    Hi All,

    Thank you in advance for your advice.

    I have a Panasonic Plasma tc-p55vt50 that's about 9 years old and has just recently stopped working :-(

    I noticed that when I turn the tv on I hear a click then screen comes on for like half a second then shuts off and the led blinks 6 times.
    I did some googling and found several video's on trouble shooting all sorts of blink codes. I finally came across one that showed 6 blink error code but for a different model. It recommended disconnecting the SC board to determine if it was the A board or power...
    04-14-2021, 09:11 AM
  • Document Archive
    LCD LED TV Service Menu Codes
    by Document Archive
    ALL LCD LED TV SERVICE MENU CODES

    Service Menu Code with Board Name

    China Universal Board / Jumper Board Service Menu Code
    Changhong Ruba Service Menu Code
    Ecostar LED TV Service Menu Code
    Orient LED TV Service Menu Code
    Haier LED TV Service Menu Code
    TCL LED TV Service Menu Code
    Samsung LED TV Service Menu Code
    LG LED TV Service Menu Code
    Videocon LED TV Service Menu Code
    Supra LED TV Service Menu Code
    Toshiba LED TV Service Menu Code
    Symphony LED TV Service Menu Code
    Veste/ LED TV Service Menu Code...
    10-31-2024, 03:58 AM
  • Loading...
  • No more items.
Working...