Re: Panasonic Plasma tc-p55vt50 6 blink error code
Could you please post the name of the eBay repair shop? I'm having the exact same problem and I'd love to get this thing repaired....
LongLiveMyPlasma
Member
Last Activity: 11-20-2021, 03:03 PM
Joined: 05-17-2020
Location: Ohio
-
Re: Panasonic TC-P42ST30: Repair for 14 blink code
My Panasonic TC-P42ST30 has been resurrected from the dead! Here's what happened:
Ultimately, the problem was the SN board. I found a guy in California on eBay (user name: asa.vd.pc) who charged $69.00 for the fix.
I am beyond thrilled that I didn't have to scrap it. Thanks to everyone on this forum who shared their success stories in other threads. It kept me motivated.
I did take a some costly wrong turns. The Youtube videos and Panasonic diagnostic document floating around out about...Leave a comment:
-
Re: Panasonic TC-P42ST30: Repair for 14 blink code
What is the benefit of these screws versus the original screws?
And these go on the board, right?...Leave a comment:
-
Re: Panasonic TC-P42ST30: Repair for 14 blink code
I ordered another P-board today, so I'll do an update after it arrives. I really hopeful that's that only remaining problem. The 14-blink code is gone and the TV easily turns off and on. I just don't get a picture or sound.Leave a comment:
-
Re: Panasonic TC-P42ST30: Repair for 14 blink code
I already screwed the SN-board back in and I don't want to take it out right now because it was a real pain sliding the ribbons back in. To my untrained eye, I couldn't see any obvious repairs to the top of the board. The bottom of the board, though, had some discoloration that suggested areas where repairs were made. If I need to take it out, I'll take pictures....Leave a comment:
-
Re: Panasonic TC-P42ST30: Repair for 14 blink code
Yes, the short on P2 occurs when the plug to the SN-board is removed.
The part you ID'd is plugged in....Leave a comment:
-
Re: Panasonic TC-P42ST30: Repair for 14 blink code
Here's an update: After installing the repaired SN-board, the TV no longer gives me the 14-blink code. However, I still don't have a picture. It turns off and on with ease (before it wouldn't turn off). My best guess here is that I need to find a working p-board (the first two boards I've I ordered have been DOA). As I mentioned earlier in this thread, the P-2 pin on the p-board is testing as a short to ground. Is anyone has any ideas or suggestions, I'd like to hear there them.
Also, could someone post a link to the...Leave a comment:
-
Re: Panasonic TC-P42ST30: Repair for 14 blink code
Okay, I'm sending my board off to get repaired and I'll check back in here to let everyone know how it worked out it. In the meantime, if anyone else has any thoughts on my P-board situation, please chime in. Thanks!Leave a comment:
-
Re: Panasonic TC-P42ST30: Repair for 14 blink code
Thanks for the suggestion!
Okay, I tested the four IBGT's you identified in the photograph and they all failed.
[B][U]Question[/U]: I'm pretty sure this means the SN-board needs to be replaced, correct?[/B]I found a guy who will fix the board if I send it to him.
[B][U]Question[/U]: And in follow-up to my earlier question, if the P-2 tests as a short, that means the P-board needs to be replaced, correct?[/B] The original board and my replacement board both tested short at the P-2 pin....Leave a comment:
-
Panasonic TC-P42ST30: Repair for 14 blink code
My beloved Panasonic TC-P42ST30 has been stricken with the 14 blink code.
I've spent many hours reading through forums, watching YouTube videos and reading the Panasonic plasma troubleshooting guide. But I'm a novice at this, and still need some help to cross the finish line.
I understand the Panasonic troubleshooting guide suggests that the 14 blink code usually means there's a problem with either P-board or A-board. However, I also learned the problem frequently rests with the SN-board.
Using my multi-meter, I was able to confirm the P-11 pin on the... -
Re: New Members - please post your introductions here
Hello everyone, I'm here to try and bring my Panasonic TC-P42ST30 back from the dead.Leave a comment:
No activity results to display
Leave a comment: