Vizio E550VL Main Board Issue

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • johnboy1313
    Badcaps Legend
    • Nov 2012
    • 1959
    • USA
    #21
    Re: Vizio E550VL Main Board Issue

    Originally posted by jhardluck
    This is a TC-P50S1. 7 blinking red lights, if I disconnect the SC board I get 6 blinking lights. If instead I disconnect the board on the opposite side(can't remember what it is called) I still get 7 blinking lights. I also tried disconnecting the upper and lower boards connected to the SC board but, this did not make a difference so, I believe the SC board is my problem. It has the glued on heat sinks so, I can't see if anything is blown. Everything visible looks fine. I can't seem to find a price under $130 for a board. Any suggestions where to get cheap parts?
    Like Tom told you, twice, in another post, you should start a new thread for each of your TVs. One for the VIzio and one for the Panasonic.

      Comment

      • jhardluck
        Member
        • Sep 2013
        • 19
        • United States
        #22
        Re: Vizio E550VL Main Board Issue

        Sorry I got over zealous trying to find help and initially I could not figure out how to start a thread. Sorry again I will stick to my threads only.

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • Asraf Atb
            Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
            by Asraf Atb
            Hi everyone,

            Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

            Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

            I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
            1 Photo
            01-27-2025, 05:02 PM
          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            ORIGINAL POWER SUPPLY BOARD
            7 Photos
            11-22-2024, 01:46 PM
          • Dani_2024
            Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
            by Dani_2024
            Hi and thanks in advance for any input you might provide!
            I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
            Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

            Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
            5 Photos
            10-28-2024, 05:06 PM
          • cheeky2
            Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
            by cheeky2
            I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
            Obviously the same LVDS connector for the screen connection...
            05-25-2024, 03:27 AM
          • cheeky2
            Sony RB2G Chassis KDL-55W815B MAIN BOARD 2 Blink Error issue resolved! Happy days :)
            by cheeky2
            For anyone interested just repaired this Sony Main board TV that had a 2 blink error code, the chassis is a RB2G which is common to quite a few different Sony models. The Ceramic 10uF 25V X7R 1206 capacitor C9114 was shorted which took the smd 2A 0603 fuse out F9101. This was powering the Buck converter TPS54332 which caused no 5V output from it.
            See the attached picture of the locations of both components. I also attach the best service manual I found for this board for anyone else in a similar position of trying to repair this main board. It's not specific to the TV model however it gives...
            01-08-2024, 05:56 AM
          • Loading...
          • No more items.
          Working...