Re: Vizio E550VL screen fades
Tried multiple inputs with the same results. I will try some canned air and let you know.
jhardluck
Member
Last Activity: 10-14-2013, 07:39 AM
Joined: 09-10-2013
Location: Easley SC
-
Re: Vizio E550VL screen fades
Caleb, when you say main board which one are you talking about. I put pictures of the boards in the visio above.Leave a comment:
-
Re: Vizio E550VL screen fades
Here are some photos of the boards....Last edited by jhardluck; 09-18-2013, 05:56 PM.Leave a comment:
-
Re: Vizio VO47L - Inverter Issues?
Sorry I got over zealous trying to find help and initially I could not figure out how to start a thread. Sorry again I will stick to my threads only.Leave a comment:
-
Re: Vizio E550VL Main Board Issue
Sorry I got over zealous trying to find help and initially I could not figure out how to start a thread. Sorry again I will stick to my threads only.Leave a comment:
-
Re: Vizio E550VL Main Board Issue
This is a TC-P50S1. 7 blinking red lights, if I disconnect the SC board I get 6 blinking lights. If instead I disconnect the board on the opposite side(can't remember what it is called) I still get 7 blinking lights. I also tried disconnecting the upper and lower boards connected to the SC board but, this did not make a difference so, I believe the SC board is my problem. It has the glued on heat sinks so, I can't see if anything is blown. Everything visible looks fine. I can't seem to find a price under $130 for a board. Any suggestions where to...Leave a comment:
-
Re: Vizio VO47L - Inverter Issues?
This is a TC-P50S1. 7 blinking red lights, if I disconnect the SC board I get 6 blinking lights. If instead I disconnect the board on the opposite side(can't remember what it is called) I still get 7 blinking lights. I also tried disconnecting the upper and lower boards connected to the SC board but, this did not make a difference so, I believe the SC board is my problem. It has the glued on heat sinks so, I can't see if anything is blown. Everything visible looks fine. I can't seem to find a price under $130 for a board. Any suggestions where...Leave a comment:
-
Re: Vizio E550VL screen fades
This is a TC-P50S1. 7 blinking red lights, if I disconnect the SC board I get 6 blinking lights. If instead I disconnect the board on the opposite side(can't remember what it is called) I still get 7 blinking lights. I also tried disconnecting the upper and lower boards connected to the SC board but, this did not make a difference so, I believe the SC board is my problem. It has the glued on heat sinks so, I can't see if anything is blown. Everything visible looks fine. I can't seem to find a price under $130 for a board. Any suggestions where to get...Leave a comment:
-
Re: Panasonic TC-P50G15 7 lights
Here are some pictures of my boards....Leave a comment:
-
Re: Panasonic TC-P50G15 7 lights
I've got the same problem with a TC-P50S1. 7 blinking red lights, if I disconnect the SC board I get 6 blinking lights. If instead I disconnect the board on the oppsite side(can't remmember what it is called) I still get 7 blinking lights. I also tried disconnecting the upper and lower boards connected to the SC board but, this did not make a difference so, I believe the SC board is my problem. It has the glued on heatsinks so, I can't see if anything is blown. Everything visable looks fine. I can't seem to find a price under $130 for a board. Any...Leave a comment:
-
Vizio E550VL screen fades
I'm having a issue with a Vizio E550VL. Wondering if I could get some advice? I'm trying to decide what needs to be replaced. I'm thinking the back light inverter or main board. When the TV is on the display is hard to see. It is dark especially towards the center. You can barely see the writing in the center. If I go to the menu and reset the TV to factory settings it displays perfect on the whole screen for a few minutes then, slowly starts to fade and darken. Any advice would be great. I am new to this sight and hope it is ok to to post on this thread. I have an old CRT in my house so, it would... -
Re: Vizio VO47L - Inverter Issues?
I'm having a similar issue with a Vizio E550VL. Wondering if I could get some advice? I'm trying to decide what needs to be replaced. I'm thinking the back light inverter or main board. When the TV is on the display is hard to see. It is dark especially towards the center. You can barely see the writing in the center. If I go to the menu and reset the TV to factory settings it displays perfect on the whole screen for a few minutes then, slowly starts to fade and darken. Any advice would be great. I am new to this sight and hope it is ok to to post...Leave a comment:
-
Re: Vizio E550VL Main Board Issue
Wondering if I could get some advice? I have recently received a used Vizio E550VL. I'm trying to decide what needs to be replaced. I'm thinking the back light inverter or main board. When the TV is on the display is hard to see. It is dark especially towards the center. You can barely see the writing in the center. If I go to the menu and reset the TV to factory settings it displays perfect on the whole screen for a few minutes then, slowly starts to fade and darken. Any advice would be great. I am new to this sight and hope it is ok to to post...Leave a comment:
-
Re: New Members - please post your introductions here
Hello, my name is Jerry. I have previously been a computer tech for years. I have recently gotten a used TV that is having issues and this looks like a great site to gain knowledge and advise.Leave a comment:
No activity results to display
Leave a comment: