So I might buy this tv a UN46D6000SF samsung 46 inch led. Guy says tv comes on no problem but picture fades to black after a minute but retains sound. Anyone know what the problem is. I'm trying to make sure its not the screen
Need quick response
Collapse
X
-
Tags: None
-
Re: Need quick response
Probably the screen, but if the backlight goes out, then PSU/LED strips.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
-
Re: Need quick response
No, but they contain individual LEDs so they are repairable... but, anyway, they probably aren't the fault. More likely panel IMO given the recent rash of them failing.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Need quick response
hello again tom, well i was donated a un46d6000sf it has a darker area n the upper left side going downwards. i suppose its the led's in the back. will open it son to find out whats going on. I like the design of it and that is so damn thin.
got any sources for replacement LED's?Comment
Related Topics
Collapse
-
by sam_sam_samDose anyone know what would cause this issue because I do not understand what is going on
The setup is the hard drive is set to never turn off
The video set to not turn off
Supposedly it setup is not to power down at all but something is not working correctly
I have three of these computers and the other two work correctly with this setup
The video is on the screen but the keyboard has no lights on and no response the mouse light is on but no response to movement
The power button does not respond correctly either because if... -
by rumpumpel1I have a L480 board with a working USB-C port and a non-working docking port that only runs on 5V. I have replaced the TB-Bios but to no avail. Both ports show 0,6V in diode mode. My Kingst Logic Analyzer showed the following strange response.
The charger offers correctly 4 voltages:
0.8781038000,Header,(8589951393),DataObject:4 Source V3 DFP Source_Capabilities
0.8781686000,PayLoad[0],(168923436),V:5V Imax:3A
0.8782978000,PayLoad[1],(1233196),V:9V Imax:3A
0.8784272000,PayLoad[2],(1356076),V:15V Imax:3A
0.8785566000,PayLoad[3],(1458501),V:20V Imax:3.25A... -
by willis6732Hello,
This macbook wont turn on. Only a quick fan spin. Sometimes fans spin a few second. Somtimes they spin fast for a few seconds. Other than that no signs of life
All the Coils on the board have voltage and battery charges fine as well.
I noticed this not sure if it is suspicious:
PPVCC_CPU_PH1 / CPUCORE_SW1 = 40 Ohms (Flex Bv shows 90 Ohms)
=.023 Diode Mode (Flex BV shows .090)
I would appreciate som support in the diagnosis.
Th anks,
K... -
Hi All...any One have firmware for Quick 857D hor air solder..please share ..
Thanks..06-13-2024, 08:35 PM -
by AbdikoI have Toshiba prostege R830 and I forget bios password
Is there any one who help me to reset
Pc serial number=5C086947H
Challenge code=C26T7-M8M1R-CUL2X-UAQN6-6FLMD
Please I'm waiting for you for response code
Response code=?-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment