LG 50PC3D-UD Screen problems

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • crbn79
    Senior Member
    • Feb 2011
    • 64

    #1

    LG 50PC3D-UD Screen problems

    So I have a 50 inch LG which I have been trying to get going. I have replaced a bad power supply, a bad Y sus and Y buffers.

    Yet I am still getting problems which I thought were a bad Y Sustain board or buffers.

    Pictures attached, please help!
    Attached Files
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: LG 50PC3D-UD Screen problems

    Perhaps the replacement parts were faulty? It still looks like bad buffer board to me. Did you replace buffer then power up with old Y-sus?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • crbn79
      Senior Member
      • Feb 2011
      • 64

      #3
      Re: LG 50PC3D-UD Screen problems

      Thanks for the response. These buffer boards just came in the mail and I've only tried them with the replacement Y-sus and replacement power supply.

      I am thinking that your assessment on the replacement parts being bad may be accurate. I used to have a .pdf on my laptop which showed the different picture issues and what the issue was, but for the life of me I just can't find it on my computer.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: LG 50PC3D-UD Screen problems

        Can you try with just the bottom buffer unplugged?
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • crbn79
          Senior Member
          • Feb 2011
          • 64

          #5
          Re: LG 50PC3D-UD Screen problems

          Originally posted by tom66
          Can you try with just the bottom buffer unplugged?
          Yes, just tried, same results with bottom half of screen black.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: LG 50PC3D-UD Screen problems

            OK, does it behave differently with just the bottom buffer connected?
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • crbn79
              Senior Member
              • Feb 2011
              • 64

              #7
              Re: LG 50PC3D-UD Screen problems

              with the top hanging loosely and disconnected from the metal tabs on the y-sus board it does the original symptoms. Does this mean the problem lay with the top buffer board?

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: LG 50PC3D-UD Screen problems

                Original symptoms?
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • crbn79
                  Senior Member
                  • Feb 2011
                  • 64

                  #9
                  Re: LG 50PC3D-UD Screen problems

                  I'm sorry, same as top 3 pictures. It acts the same as if both buffers are connected.

                  Comment

                  • tom66
                    EVs Rule
                    • Apr 2011
                    • 32560
                    • UK

                    #10
                    Re: LG 50PC3D-UD Screen problems

                    Can you upload a picture of each buffer?
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • crbn79
                      Senior Member
                      • Feb 2011
                      • 64

                      #11
                      Re: LG 50PC3D-UD Screen problems

                      Sorry these aren't the best images, if needs be I can go grab a light to shine on them while I take the picture.

                      1st picture is the top buffer. Actually after looking at the uploaded pictures, those are horrid. Getting the good camera instead of my phone.


                      Edit: 2nd picture is top, 3rd bottom.

                      Edit2: I've run diode mode from ground and get closed connection on 4 of the screen connectors one one pin each. P4, P5, P6, and P7. From what I read that means those 4 ICs are shot, correct?
                      Attached Files
                      Last edited by crbn79; 04-26-2013, 06:22 PM.

                      Comment

                      • tom66
                        EVs Rule
                        • Apr 2011
                        • 32560
                        • UK

                        #12
                        Re: LG 50PC3D-UD Screen problems

                        Test diode mode across the two large gold pads; if there's a short, then yes, the ICs are bad and you probably got bad parts.
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        • crbn79
                          Senior Member
                          • Feb 2011
                          • 64

                          #13
                          Re: LG 50PC3D-UD Screen problems

                          You are dead on, shows continuity of .024! 5 of the 6 ICs are showing shorts to ground as well. What are the chances that those would blow my replaced Y-Sus board?
                          Last edited by crbn79; 04-26-2013, 06:46 PM.

                          Comment

                          • tom66
                            EVs Rule
                            • Apr 2011
                            • 32560
                            • UK

                            #14
                            Re: LG 50PC3D-UD Screen problems

                            They possibly have done damage to the Y-sus though due to your panel having a sustain output (glowing screen) you may have gotten away with it. So who sold you dud parts? The test is so easy to do, many sellers for some reason do not bother.
                            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                            Comment

                            • crbn79
                              Senior Member
                              • Feb 2011
                              • 64

                              #15
                              Re: LG 50PC3D-UD Screen problems

                              Got it from an ebay seller who has sold a lot of parts with good reviews. I don't know if putting the name here breaks the TOS, so I'll avoid that unless I'm certain it does not. My Sustain board came from Coppel, but they were out of buffer boards or I would have ordered it at the same time from them.

                              Comment

                              • crbn79
                                Senior Member
                                • Feb 2011
                                • 64

                                #16
                                Re: LG 50PC3D-UD Screen problems

                                Thanks again for your help tom66!

                                Comment

                                • crbn79
                                  Senior Member
                                  • Feb 2011
                                  • 64

                                  #17
                                  Re: LG 50PC3D-UD Screen problems

                                  New buffer added. Now I have the following problem..... Does it ever end?? lol....

                                  When the Input selection comes up on the screen it also gives a white box from top to bottom.

                                  Bad Control Board? If so how do I go about testing this?
                                  Attached Files

                                  Comment

                                  Related Topics

                                  Collapse

                                  • jean luc ferre
                                    laptop hp g72 b52sf screen problems
                                    by jean luc ferre
                                    Hello,
                                    on this laptop hp g72 b52sf i have screen problems as you can see with the photo joined in attachments.
                                    the used graphic card is "intel hd graphics" and the id of the integrated screen is : "monitor/SEC3354".
                                    i verified the driver of the péripherals and they are ok. i verified the definition and settings of the graphic card and of the screen : definition 1600x900 and refreshment frequency :60hz. (they are the sames for the graphic card and the screen).
                                    i don't understand the reasons of the white stripe at the bottom of the screen below the task...
                                    06-07-2025, 03:27 PM
                                  • howardc64
                                    A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                                    by howardc64
                                    Problem

                                    This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                                    08-04-2024, 10:36 PM
                                  • Ryan.man
                                    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                                    by Ryan.man
                                    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                                    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                                    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                                    02-04-2025, 12:23 PM
                                  • smic717394
                                    iphone XS turns off when press on screen.
                                    by smic717394
                                    Hi,

                                    I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                                    07-25-2024, 10:16 AM
                                  • Chrissygizmo
                                    Samsung UE55JU6800K half screen dark
                                    by Chrissygizmo
                                    Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                                    I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                                    02-10-2025, 12:33 AM
                                  • Loading...
                                  • No more items.
                                  Working...