red grainy screen

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • dunclie
    New Member
    • Apr 2013
    • 3
    • uk

    #1

    red grainy screen

    Hi,
    I have an LG 50ps3000-zb plasma tv.
    Yesterday it made a sort of pop and went into standby. We turned it back on with the remote and the picture now has a red grainy look to it. I have checked the va and vs voltage and both are fine other than that I am at a loss. Any help would be greatly appreciated,
    Cheers,

    Dunc.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: red grainy screen

    There is a repair kit available for this fault.
    http://www.ebay.co.uk/itm/LG-50PS300...item4169df3fe3
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • dunclie
      New Member
      • Apr 2013
      • 3
      • uk

      #3
      Re: red grainy screen

      Tom66,

      Thanks very much for your quick reply and keep up the good work

      Dunc.

      Comment

      • dunclie
        New Member
        • Apr 2013
        • 3
        • uk

        #4
        Re: red grainy screen

        Thanks again Tom66, the kit worked a treat

        Comment

        Related Topics

        Collapse

        • Ryan.man
          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
          by Ryan.man
          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
          02-04-2025, 12:23 PM
        • smic717394
          iphone XS turns off when press on screen.
          by smic717394
          Hi,

          I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
          07-25-2024, 10:16 AM
        • Chrissygizmo
          Samsung UE55JU6800K half screen dark
          by Chrissygizmo
          Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
          I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
          02-10-2025, 12:33 AM
        • spice_disc
          Vizio TV M50-C1 reboot cycle and static on screen
          by spice_disc
          I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

          The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
          09-08-2024, 02:37 PM
        • ipatch
          ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
          by ipatch
          i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
          08-24-2024, 02:36 PM
        • Loading...
        • No more items.
        Working...