LG 47LW5600-UA LCD 3D No picture,with sound and backlight

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cliff_hootarski
    Badcaps Veteran
    • Jul 2006
    • 411
    • USA

    #1

    LG 47LW5600-UA LCD 3D No picture,with sound and backlight

    LG47LW5600-UA.AUSYLJR.

    Suspected Tcon fuse. Fuse is OK.
    I can change channels, inputs, volume etc.
    Thinking Main Board OK.

    Anyway to easily troubleshoot down to Main Board, Tcon, or Panel?

    Both the Tcon board and Main boards are available to purchase.

    I've had advice from both Shopjimmy (main board) and RetechTV (Tcon) were bad.

    Anyone out there with any experience with this TV?

    By the way the panel number is LC470EUF (SD) (F2).

    The Tcon is installed on the bottom of the LCD, so two different pictures!
    Attached Files
    Last edited by cliff_hootarski; 03-22-2013, 03:34 PM.

Related Topics

Collapse

  • advant
    Driving a Sharp TCON/panel with a universal main board
    by advant
    This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

    I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
    02-03-2020, 12:25 AM
  • ChaosLegionnaire
    what i went through dealing with my mobo with dead onboard sound!
    by ChaosLegionnaire
    so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

    i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
    09-13-2022, 09:02 AM
  • iglitare
    Sony KD-75XF9005 grey Picture but Sound. TCON or panel?
    by iglitare
    Hi,

    i want to repair a Sony KD-75XF9005 TV that initially only showed a grey picture.
    Backlight seems to work, Sound (Setup menu after reset) works.
    If i dissconnect the left FFC cable from TCON to panel i have half a screen on the right. If left cable is connected always only the grey screen.
    Interchanged the cables, its always only the right side that is working. Always grey if left side is connected.
    With my small knowledge i would think at least the cables are good.

    Can this happen because of a bad tcon board?
    Or is it always a bad/shorted...
    09-04-2025, 07:13 AM
  • maxim2511
    LG 55EC930V OLED - swich on swich of no screen
    by maxim2511
    My Oled Tv is 55inch tv, 3 days ago I notice that middle of the screen is getting warmer and on picture I have ghosting, missing red color. Color red was still displaying, but it was not so strong as corners of the screen and watching some movies makes me angry.
    Then I get an idea to take it apart and clean boards from dust.
    In side of Tv was not so bad, I take compressed air in can, and gently blow up.

    Also I was thinking to styrofoam sponge to isolate power board from screen that the middle of the screen will not worm so much. Because Led on screen when gets higher...
    05-14-2021, 02:21 AM
  • kca
    LG 82UN8570AUD ~ TCON or PANEL?
    by kca
    Hello all ~

    Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

    When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

    I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
    08-31-2025, 06:38 AM
  • Loading...
  • No more items.
Working...