first off a big hello and respects to everyone in the forum
ok so i got the above model which when powered up the front led cycles through from red to amber then to green and back to red
checked caps on psu and looked ok but changed 6 of them anyways with a repair kit for that board, tested the VS and VA when the ysus and zsus were disconnected and there are ok at 186 volts and 60 volts
the plasma powers ok when the ysus is disconnected, so i replaced ysus with a compatible one and it still goes back to standby after starting up so i am starting to think the buffer board could now be at fault, fuses are ok on the ysus and every were else
any help appreciated
thanks in advance
ok so i got the above model which when powered up the front led cycles through from red to amber then to green and back to red
checked caps on psu and looked ok but changed 6 of them anyways with a repair kit for that board, tested the VS and VA when the ysus and zsus were disconnected and there are ok at 186 volts and 60 volts
the plasma powers ok when the ysus is disconnected, so i replaced ysus with a compatible one and it still goes back to standby after starting up so i am starting to think the buffer board could now be at fault, fuses are ok on the ysus and every were else
any help appreciated
thanks in advance
Comment