Cap Identification help. Vizio E470VL main board cap

[RKnep]

Having trouble identifying this buldging cap.
07
470
EZD

I can't find the schematic for the board.
I saw a pic on here of the same board with this cap that was marked
0P
470
EZD

Any help would be much appreciated.
Thanks

[RKnep]

Re: Cap Identification help. Vizio E470VL main board cap

Also, just saw a cap on the same board marked
Q3
470E
CD

[mariushm]

Re: Cap Identification help. Vizio E470VL main board cap

I can't tell who made the capacitor from the color combination.

BUT, Panasonic and other manufacturers use the following codes for voltage rating:

Letter Voltage
e 2.5
g/G 4
j/J 6.3
A 10
C 16
D 20
E 25
V 35
H 50

So your capacitors is most likely a 470uF 25v capacitor. And the ZD might be the series but I don't think it's Nichicon ZD.

ps. And the ones with C at the beginning of the three letter code might be rated for only 16v.

[tom66]

Re: Cap Identification help. Vizio E470VL main board cap

Looks normal to me -- the vent will appear to split if cap is actually failed.

[RKnep]

Re: Cap Identification help. Vizio E470VL main board cap

It's bulging up pretty bad. The vent marks are actually pushed out.

Thanks. I think I'll go with a 470uF and I might just go with a 50V.

[tom66]

Re: Cap Identification help. Vizio E470VL main board cap

I've seen new from the packet caps look just like that. You should use two soldering irons, or a hot air station. One iron only will rip off the pad.