Hi All, 1st post. Got a TV from a friend which went bad. It has colored vertical lines/bands running down it on power up. Seems to power up fine with no problem however. 
I took it apart and found that out when the TV is on and I pop one of the ribbon cables attached to the TCON out jiggle it around a bit and pop it back in that the screen is working perfectly and is stable for as long as the TV is powered up.
As soon as I turn it off and power it back up the vertical lines are back. Good thing I know the panel is good, seems like the ribbon cables are fine since they produce a perfect picture after the 'popping cable trick'. I didn't notice any bulging leaking capacitors on the power supply.
Any leads as to what the problem might be? Seems like an issue on power up with all the ribbon cables attached, once one's popped out and put back in picture is fine and dandy.
on power up
disconnecting a ribbon cable (far right cable facing screen orientation)
reconnecting cable
TCON
Mainboard (?)
PowerSuppy and Caps closeups

I took it apart and found that out when the TV is on and I pop one of the ribbon cables attached to the TCON out jiggle it around a bit and pop it back in that the screen is working perfectly and is stable for as long as the TV is powered up.
As soon as I turn it off and power it back up the vertical lines are back. Good thing I know the panel is good, seems like the ribbon cables are fine since they produce a perfect picture after the 'popping cable trick'. I didn't notice any bulging leaking capacitors on the power supply.
Any leads as to what the problem might be? Seems like an issue on power up with all the ribbon cables attached, once one's popped out and put back in picture is fine and dandy.
on power up
disconnecting a ribbon cable (far right cable facing screen orientation)
reconnecting cable
TCON
Mainboard (?)
PowerSuppy and Caps closeups
Comment