I have this TV that has a distorted image but it seems OSD is not affected leading me to believe the main is at fault.
I ordered another main only to have it flash a 14 code.
That code is LCD panel but I am wondering if that one is actually detecting a fault in the TCON perhaps.
With the replacement board, it cuts on with a backlight for about 10 seconds only to go to that code - but if you disconnect the LVDS cable it stays on, which is why I am leaning towards TCON.
And for funnies, justanswer claims this to be a power supply fault - and to replace the caps - but this supply has chemi-cons and a good steady voltage hmmmm - if those caps failed then there is a bigger problem than the caps lol
I will have pictures Monday but was wondering if any thoughts would arise before I can get back to it.
I ordered another main only to have it flash a 14 code.
That code is LCD panel but I am wondering if that one is actually detecting a fault in the TCON perhaps.
With the replacement board, it cuts on with a backlight for about 10 seconds only to go to that code - but if you disconnect the LVDS cable it stays on, which is why I am leaning towards TCON.
And for funnies, justanswer claims this to be a power supply fault - and to replace the caps - but this supply has chemi-cons and a good steady voltage hmmmm - if those caps failed then there is a bigger problem than the caps lol
I will have pictures Monday but was wondering if any thoughts would arise before I can get back to it.
Comment