Need help with a part # Insignia NS-L32Q-10A

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dblueman
    Senior Member
    • Nov 2012
    • 84
    • United States
    #1

    Need help with a part # Insignia NS-L32Q-10A

    On the power supply board #715G3332-1 at location R948 is this a thermal fuse? If not, what is it and where can I get one. Why I ask is I have read a previous posting on this model which I have the same issue The IC chip is burnt. And it looks like the part at R948 is also burnt. There is a cermamic capacitor 102k right near it and it looks fine. Note to the member whom was able to give the info on the chip! Thank-You that was a huge help! I too was finding it hard to find any info on that item. What I can read off of it is 0.1 ohm 96e(this is the part at R948) Looks like a resistor or an inductor all grey in color. Thanks Everyone for your help.
    Attached Files
    Last edited by Dblueman; 11-24-2012, 02:05 PM.
    Tags: None
    • selldoor
      Slow Learner
      • Dec 2010
      • 7870
      #2
      Re: Need help with a part # Insignia NS-L32Q-10A

      Suggest you add in a link to the post and post a picture of the parts you want help with. Save us a lot of time.
      A lot of us will have never seen this set.
      Please upload pictures using attachment function when ask for help on the repair
      http://www.badcaps.net/forum/showthread.php?t=39740

        Comment

        Previous template Next

        Related Topics

        Collapse
        • edugimeno
          Finding the wrong part at a loooong led strip, part works fine, part flickers, all parallel...
          by edugimeno
          Hi There!
          I'm trying to help my friend who owns a restaurant be just bought.
          He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
          It's stuck using, I guess, the 2 sided tape that comes with the strip
          The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth...
          09-05-2024, 09:34 AM
        • G-Sting
          iPad Pro A1876 SHORT Part Identify Help Needed
          by G-Sting
          So My iPad was not charging and booting up . i went to a local technician and he checked with thermal and this Part marked in 1st Photo is Short.
          So then i went on to boardview and downloaded the schematics and identified this part in 2nd Photo. Now i am confused what exactly is the part called ? where should i get this from ?


          i contacted my technician and he sent me his BoardVIew screenshot in 3rd Photo. In his Boardview the part is called X2826.... Something

          SO My main concern is what part should i order what should i search the name for ?
          on Ipad...
          4 Photos
          05-15-2025, 09:30 AM
        • Yanleb
          Panasonic part number in service manuals
          by Yanleb
          In the Panasonic service manuals, both in the board schematics and in the part listing, the part numbers that are given are Panasonic part numbers instead of the actual part numbers.

          This is especially annoying for small SMD components like diodes and transistors when you only have 1-3 digits printed on the component body.

          For an example, look at the attached PDF.

          Do you have a way to cross reference the Panasonic part number with the actual part number?

          Thanks....
          07-03-2023, 08:16 PM
        • FreakyMex
          Trouble to identify part (Lunii screen) for replacement
          by FreakyMex
          Hello guys. I'm a complete noob in electronics. I'd like to repair my child Lunii's (a "story box"), basically an audio player that allows the childs to choose between several options the places, characters, objects of the story, and then play a story according to the choice of the child. There is a screen that display the selected option before each choice. The Lunii fell and the screen is now broken.
          I'd like to repair it (probably just have to change the part, because the lunii still works perfectly fine) but I can't manage to identify the part/order it online. Do you have any...
          https://photos.app.goo.gl
          02-17-2025, 01:16 AM
        • esinior
          Smd code to part number
          by esinior
          Hi i have a smd part with probably mark "QO 11" or "Q0(zero) 11" on it, and its package is SOT89, i doubt its KTB1260 PNP transistor, but in measuring with diode mode of multimeter it shows number 1.4 between emitter and collector pins and its not open circuit, and .59 from collector to base and .8 from emitter to base , and these numbers doesn't match a pnp transistor, i couldn't find any part number and datasheet for it, does anybody have information for that part number?
          I've attached pics of this part
          Thanks...
          4 Photos
          08-20-2024, 02:50 AM
        • Loading...
        • No more items.
        Working...