Akai lct3201ad lcd

[TorqueRanger]

Today I picked up a beautiful AKAI LCT3201AD LCD tv but the problem is that the unit does not work... So I opened the unit up and found a crap load of Decon Caps blowing up.. I want to repair this unit but not sure if it's really worth fixing ??? There are real small caps(not the SMD caps) that look all good but should they be replaced or I should be good using them consider that I am replacing the rest of them ???
Would you guys rebuild the board or buy a used one off ebay ????

The main board pictured below (Not my board but a pic used for representation ) that I have has over 1/3 of the caps blow or the rubber piece is coming out and the power board has 8 more caps that need repaired too ..

[TorqueRanger]

Re: Akai lct3201ad lcd

Who make Decon caps ????
I have 2 different caps but the same values but whats makes these caps different and how come I can't find any info about these either..
Decon 16v 220uf SH m 105 degree (Blue label )
Decon 16v 220uf SAII m 85 degree (Black label)


Oh I am going to place an order through mouser and I was going to use this cap(listed below) to replace the one listed and wanted you guys opinion if it's good or bad ?????
Manufacturer: Panasonic
Product Category: Aluminum Electrolytic Capacitors - Leaded
RoHS: RoHS Compliant Details
Capacitance: 220 uF
Tolerance: 20 %
Voltage Rating: 16 V
Operating Temperature Range: - 40 C to + 105 C
Termination Style: Radial
Dimensions: 6.3 mm Dia. x 11.2 mm L
Product: Low ESR Electrolytic Capacitors
Packaging: Bulk
Case Diameter: 6.3 mm
Case Length: 11.2 mm
Lead Spacing: 2.5 mm
Series:

[selldoor]

Re: Akai lct3201ad lcd

I have often wondered what the problem is in the us with us-ing google.

http://www.decon.com.cn/


The important part about the Panasonic Description is missing

Series: ???? FR or FM should be ok.

And pictures not of your boards are of little interest and please post pictures using manage attachments and not in line

You might also want to read this
https://www.badcaps.net/forum/showth...ighlight=decon

[TorqueRanger]

Re: Akai lct3201ad lcd

I have often wondered what the problem is in the us with us-ing google.

http://www.decon.com.cn/

I do apologise but I tried many times to find any info and kept coming up with some company name Ducon...

The important part about the Panasonic Description is missing

Series: ???? FR or FM should be ok.

And pictures not of your boards are of little interest and please post pictures using manage attachments and not in line

I will post up pics of the board when I get a chance because time is a little tight right now....
http://www.mouser.com/ProductDetail/...cNRWEe3JPEQ%3d
Manufacturer Part #:
EEU-FR1C221

[selldoor]

Re: Akai lct3201ad lcd

EEU-FR1C221 =They are Fr series then so they would be fine

[TorqueRanger]

Re: Akai lct3201ad lcd

I am trying to place one order through one company but is imperative to use low ESR caps ????
IS the FR series any better than what was already in there ????
What caps would you use ???

[Mr Bill]

Re: Akai lct3201ad lcd

I am trying to place one order through one company but is imperative to use low ESR caps ????
IS the FR series any better than what was already in there ????
What caps would you use ???

FR is probably 100 times better than the caps that are on the board currently. Panasonic FM, FC, FR are the series of choice by most members here. I've had the pleasure of recapping this mainboard though mine was for 27" version. I think just about every cap 100uF and above was bad. After it was all over i think i had atleast 30 caps replaced.

[TorqueRanger]

Re: Akai lct3201ad lcd

Well I am up too 160 caps that are getting replace in this T.V.

[TorqueRanger]

Re: Akai lct3201ad lcd

I am fixing a T.V and some how last while I was testing it the DVD drive came loose and touched the inverter board .. Well the T.V shutdown and nothing happened that I could see.... I remounted everything and tried turning it on and the LED turns from red to green but then nothing happens and when I try turning it off it does nothing but stay green... I did some searching and found nothing wrong on the board I could see..I did some testing and found that the main board was not fully turning on because I override the inverter board and that's works fine but I have nothing on the screen .. I checked out the power supply and found nothing wrong except the 9V rail which is coming up 12v with no load and there is only a 5W resistor which pulls power from the 12v rail .. The resistor measures 4.7 Ohm's (Part number (PH)5W5R0J ) and I can't find any info on it.. Is there suppose to be 12v on the 9v rail or am I doing something wrong here ??? Also do you guys have any other input or help????
Power board -MLT169A