Panasonic TCP42S2 worth getting?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • IamCanadian
    Senior Member
    • Nov 2012
    • 119
    • Canada
    #1

    Panasonic TCP42S2 worth getting?

    This is the problem described.

    "Don't think it is the panel. Before it completely quit working we were able to get it to power on after pushing the power button a dozen times or so. The remote would work as well after a few tries. So w e could use it
    , after while it was taking too many tries. Each time you push the power button it takes a few seconds to cycle on so we lost patience. Have tried a few times since and it will not power on.
    So the panel was fine. Just seems to be something to do with powering on"

    Sounds like ps or main board to me.
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Panasonic TCP42S2 worth getting?

      I thought you had it already? Sounds like PSU to me. If it blinks 2, 4 or 10 times, it's the PSU.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • IamCanadian
          Senior Member
          • Nov 2012
          • 119
          • Canada
          #3
          Re: Panasonic TCP42S2 worth getting?

          he said it only blinks once, If I want it he will drop it off today...just dont have alot of room left for tv's lol

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: Panasonic TCP42S2 worth getting?

              One blink is A board usually, but sometimes "No particular check point" which could be troublesome to track down.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Andre Gilbert
                  Panasonic TC-P55ST50 8 blinks then no blinks
                  by Andre Gilbert
                  Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
                  Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

                  TV Model: Panasonic TC-P55ST50
                  ...
                  1 Photo
                  11-20-2024, 08:52 PM
                • AquaMan Ua
                  Problem with PANASONIC CF53 laptop after changing BIOS settings
                  by AquaMan Ua
                  Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
                  2
                  2 Photos
                  05-17-2025, 09:40 AM
                • aa10aa10
                  Panasonic Toughbook CF-33 mk1 BIOS repair
                  by aa10aa10
                  Good day,

                  I have tried to remove BIOS supervisor password from Panasonic Toughbook CF-33 mk1. Model number CF-33AENABTG, unfortunately I don't have any other info.

                  I read the BIOS using afuwin, edited it and tried to flash new edited BIOS using afuwin. Unsuccessfully. Afuwin showed "Error: Problem erasing flash." starting with 0x00040000 and stoped. Then I tried many other options to flash BIOS from Windows without any luck. Finally i rebooted the device - and no post. Afterwards I have read the corrupted bios chip (MX25L12873F) using EZP2010 programmer....
                  01-21-2025, 06:13 AM
                • Mnawar27
                  Panasonic CF-H2AU24EF3 bios locked
                  by Mnawar27
                  Hello ,my Panasonic CF-H2AU24EF3 I get bios password locked after factory reset, can't enter bios
                  I need help to remove it,
                  thankyou all.

                  Panasonic CF-H2AU24EF3
                  SN; 2FKCA26876...
                  11-16-2024, 08:00 AM
                • Yanleb
                  Panasonic part number in service manuals
                  by Yanleb
                  In the Panasonic service manuals, both in the board schematics and in the part listing, the part numbers that are given are Panasonic part numbers instead of the actual part numbers.

                  This is especially annoying for small SMD components like diodes and transistors when you only have 1-3 digits printed on the component body.

                  For an example, look at the attached PDF.

                  Do you have a way to cross reference the Panasonic part number with the actual part number?

                  Thanks....
                  07-03-2023, 08:16 PM
                • Loading...
                • No more items.
                Working...