i got this model ilo v23dlwx. when i first plugged it in and hit power, everything came on but screen was grey with vertical thin collored lines for a few sec. then a flickering blue screen that went to solid blue. so i tuned in the cable channel used for my cable box and picture had horizontal white lines. over time these lines faded but some were still there after 20min.
i turned it on again and picture came up right away but had alot of horizontal lines again that mostly faded over a few min. there also seems to be a black bar across bottom about 1/2in. but its not there when i have a blue screen(no cable)
i let the tv sit off/stby for a while and when i turned it on i got the grey screen, flickering blue-solid blue screen again. durring this phase theres no response from remote. after a min or so remote works fine. if i turn it off and on right away it work.
i know my pics arent good but i have to use my phone so i included some part #.
main board: v23dmbx-u12 03 543
543L0812303000002295
power supply: up1232a-01
p/n: 6693006615
panel: hsd230wx12
b1L0na22a1a21a62140g0677n45ra
te0000k64000001
inv board: plcd09231202h
5053910000
0515
board pictured im not sure of: hannstar 7072600a01 a1
(no other labels on it) b4 05 20
the back of the panel has a cage on it and the corner of it is slightly bent out of shape(left/inv side) and looks scuffed but theres no sign of it being dropped on plastic houseing. some pics are rotated/flipped sorry.
any help with repairing this, or a service manual would be great.
this appears to be the same: http://www.tgohome.com/ServiceManual...h=Submit+Query
i turned it on again and picture came up right away but had alot of horizontal lines again that mostly faded over a few min. there also seems to be a black bar across bottom about 1/2in. but its not there when i have a blue screen(no cable)
i let the tv sit off/stby for a while and when i turned it on i got the grey screen, flickering blue-solid blue screen again. durring this phase theres no response from remote. after a min or so remote works fine. if i turn it off and on right away it work.
i know my pics arent good but i have to use my phone so i included some part #.
main board: v23dmbx-u12 03 543
543L0812303000002295
power supply: up1232a-01
p/n: 6693006615
panel: hsd230wx12
b1L0na22a1a21a62140g0677n45ra
te0000k64000001
inv board: plcd09231202h
5053910000
0515
board pictured im not sure of: hannstar 7072600a01 a1
(no other labels on it) b4 05 20
the back of the panel has a cage on it and the corner of it is slightly bent out of shape(left/inv side) and looks scuffed but theres no sign of it being dropped on plastic houseing. some pics are rotated/flipped sorry.
any help with repairing this, or a service manual would be great.
this appears to be the same: http://www.tgohome.com/ServiceManual...h=Submit+Query
Comment