Magnavox LCD TV power fluctuation

[dman623]

Re: Magnavox LCD TV power fluctuation

I replaced 3 x 1000uf 35v from radioshack

An additional bulging cap is 220uf 35v

I also have:

2 x 33uf 50v

1 x 1000uf 16v

[Mr Bill]

Re: Magnavox LCD TV power fluctuation

ok, These are all from Digikey. I am somewhat guessing at sizes but i have a few power supplies in my basement that are sorta close to your design. Check the dimensions (diameter & height) before ordering to make sure it's all gonna fit. I've made the mistake a few times getting a cap that was too tall but i believe your tv doesn't have a cage that goes over it so it shouldn't be an issue.

1000uf 35v
http://www.digikey.com/scripts/DkSea...=0&y=0&cur=USD
1000uf 16v
http://www.digikey.com/scripts/DkSea...7&y=19&cur=USD
220uf 35v
http://www.digikey.com/scripts/DkSea...7&y=20&cur=USD
33uf 50v
http://www.digikey.com/scripts/DkSea...9&y=20&cur=USD

[dman623]

Re: Magnavox LCD TV power fluctuation

Thanks so much for your help. I'll post back here when I've replaced those.

[dman623]

Re: Magnavox LCD TV power fluctuation

I installed the new caps and it worked like a charm. Thanks so much for your help.