Sharp aquos 32 model lc32-px5m tv lcd picture problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • WEJ
    Senior Member
    • Oct 2010
    • 68

    #1

    Sharp aquos 32 model lc32-px5m tv lcd picture problem

    Hai, to all, sifu, i have a problem with my TV LCD SHARP AQUOS 32 MODEL LC32-PX5M .

    The picture from my LCD panel is having problem.What the course of my tv problem simptom.






    Are bad T-Con card is the culprit for making the problem?






    For information, i already open the back cover panel, and tighten all LVDS and flex riben cabel, but the problem is still same.

    I also have reflow all chipset in the T-con card & the video card with rework station heatgun blower









    Hoping someone in this forum could guide me to repair the problem.TQ
    Last edited by WEJ; 09-26-2012, 03:25 AM.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

    I had similar picture problems with a Sharp TV, though it was different from yours, it was solved with a simple reset:

    http://www.tgohome.com/ServiceManual...epair_tips.txt
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • WEJ
      Senior Member
      • Oct 2010
      • 68

      #3
      Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

      Originally posted by tom66
      I had similar picture problems with a Sharp TV, though it was different from yours, it was solved with a simple reset:

      http://www.tgohome.com/ServiceManual...epair_tips.txt
      TQ, tom66 for reply my question.For your information, i already try the reset method same as you suggest before, but the TV cannot reset.

      Are their any hard reset method that i can use fo my model.

      For infomation i also have done reset procedure from my TV manual.Hope any sifu can suggest another method or hardware that i must check.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

        Originally posted by WEJ
        TQ, tom66 for reply my question.For your information, i already try the reset method same as you suggest before, but the TV cannot reset.

        Are their any hard reset method that i can use fo my model.

        For infomation i also have done reset procedure from my TV manual.Hope any sifu can suggest another method or hardware that i must check.
        Can you access the service menu? In those steps, can you get to the "K" on the screen after pressing the right buttons? Your set may be different - I'll look up the procedure for yours.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • WEJ
          Senior Member
          • Oct 2010
          • 68

          #5
          Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

          Originally posted by tom66
          Can you access the service menu? In those steps, can you get to the "K" on the screen after pressing the right buttons? Your set may be different - I'll look up the procedure for yours.
          TQ, tom66, the problem is i cannot get to the "K" on the screen .

          For your info i already research the video simptom, but cannot compare with the video simptom from bad T-Con card that i have get.

          Comment

          • WEJ
            Senior Member
            • Oct 2010
            • 68

            #6
            Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

            Hi, Tom66, i have manage to get to "K" that u suggest earlier, the method is almost same,

            The procedure for Sharp Aquos 32 model lc32-px5m is to hold the Input and volume down buttons at the same time (wait 5 seconds) then plug in TV and hold down power button.

            For go to menu, hold down vol- & ch-.But in my tv system, i can get the "EEP CLEARB" or Factory Ini or Industry ini.I have scroll down the menu, where is it.

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK

              #7
              Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

              Are there any other reset options- anything sounding like a reset option at all? I'm not very familiar with Sharp TVs. In fact that 32" with the reset is the only one I've fixed.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • WEJ
                Senior Member
                • Oct 2010
                • 68

                #8
                Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                Hi, tom66, tq for answering,.To all sifu & Tv LCD repairer, i have manage to get in to diagnostic & testing mode in my TV system, but i cant find any reset function for the system, please help & guide me to troubleshoot this problem.

                I am new at LCD TV repairing, but i have many experience for repairing Laptop & PC.

                To all, who help, i am appreciate your knowledge.TQ











                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK

                  #9
                  Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                  I can't see anything either... does the distortion affect all inputs, and does it affect the menus such as the setup menu? Do you have the service manual for this set?
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  • WEJ
                    Senior Member
                    • Oct 2010
                    • 68

                    #10
                    Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                    Hi, Tom66, yes the video problem affect to all input (DVD, satellite decoder input, TV analog input).For the setup menu, the color i think in good shape (red, yellow, blue is ok), only when display the video, the problem acquired.

                    I have the service manual for The TV but I cant find anything that is related to solving the problem.

                    Actually, this problem acquire, after my younger son play with video cable input & hdmi input cable at the right side of the TV.
                    Last edited by WEJ; 09-27-2012, 02:41 AM.

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK

                      #11
                      Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                      I was hoping that there might be "Tech Tips Bulletin" available as Sharp usually publish, but it seems not. Does the distortion affect the menus such as the setup menu?
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment

                      • WEJ
                        Senior Member
                        • Oct 2010
                        • 68

                        #12
                        Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                        Originally posted by tom66
                        I was hoping that there might be "Tech Tips Bulletin" available as Sharp usually publish, but it seems not. Does the distortion affect the menus such as the setup menu?
                        For the setup menu, the color is good.I will attached another picture for the setup menu.

                        Are any sifu or LCD TV repairer have sharp aquos LC-32PX5M firmware.I am already check the model firmware at Sharp website, but no firmware for my TV model.

                        Comment

                        • tom66
                          EVs Rule
                          • Apr 2011
                          • 32560
                          • UK

                          #13
                          Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                          Anything under DVP or DVP-X2 or DVP-M2?
                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • kevinm34232
                            Badcaps Legend
                            • May 2012
                            • 1884
                            • USA

                            #14
                            Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                            Is the video color inverted? It almost looks like animation.. Anyway we've seen a few of those inverted image problems on here but I don't think anyone found what was causing it.. Wonder if your HDMI port was damaged causing this..

                            Comment

                            • WEJ
                              Senior Member
                              • Oct 2010
                              • 68

                              #15
                              Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                              Originally posted by kevinm34232
                              Is the video color inverted? It almost looks like animation.. Anyway we've seen a few of those inverted image problems on here but I don't think anyone found what was causing it.. Wonder if your HDMI port was damaged causing this..
                              Hmm, tq kevinm34232 for answering. This model has 2 HDMI PORT, but i have test it, same as other one.

                              The video port is also same problem to all port.If I can reset my TV to factory default can solve this problem?

                              Comment

                              • tom66
                                EVs Rule
                                • Apr 2011
                                • 32560
                                • UK

                                #16
                                Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                                It has worked before for me on a Sharp TV. If you can find a reset option, it is worth a shot. Otherwise, I would say the main board (with the video inputs on it) is likely the cause.
                                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                Comment

                                • WEJ
                                  Senior Member
                                  • Oct 2010
                                  • 68

                                  #17
                                  Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                                  Hi, any sifu or Tv repairer can give advice or idea to repair & rectify this problem

                                  Comment

                                  • godofwap
                                    New Member
                                    • May 2013
                                    • 3
                                    • UK

                                    #18
                                    Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                                    Hi, i have an LC46X20E which recently has given me the 2 x power 3 x OPC error code which as i understand is a power supply detection error, ive tried 3 different power boards but when i try to get into service mode i dont get the "k" to get into service mode, ive tried numerous combinations but i just keep getting the same blinking led error....please help as im at my wits end.

                                    Comment

                                    • tom66
                                      EVs Rule
                                      • Apr 2011
                                      • 32560
                                      • UK

                                      #19
                                      Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                                      Certain blink codes cannot be overriden such as blink codes starting with "2". The fault is unlikely to be on the power board. It is likely on the main board.
                                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                      Comment

                                      • godofwap
                                        New Member
                                        • May 2013
                                        • 3
                                        • UK

                                        #20
                                        Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

                                        Thanks for your reply, i'll order a main board and see if that helps

                                        Comment

                                        Related Topics

                                        Collapse

                                        • j120975
                                          Sharp aquos lc-40le820e power on problem
                                          by j120975
                                          Good afternoon to all of you. First of all sorrybfor my bad English. I have a sharp aquos tv ,and i m dealing this problem. If i leave the power cord disconnected,then it starts normally for one minute approximately. After that the tv restarts and only the touch panel lights working for about 10 seconds and only 1-2 seconds lights up the led panel. After that loop again. No signal lights in center. I think probably is a power supply problem . I can see 5 v ,13.3v in 4 pins . I m a mobile technician and i can follow your instructions if you yave some suggestions. Thank you in advance.
                                          04-09-2021, 09:51 AM
                                        • sefoster
                                          Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
                                          by sefoster
                                          I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
                                          11-20-2022, 09:29 AM
                                        • jonah1024
                                          Sharp Aquos LC-40UG7252E LCD TV burn in?
                                          by jonah1024
                                          Hello!

                                          I'm a few days old into this TV screens repair universe so please bear with me.

                                          Recently, and all of a sudden my 40ā€ 4K Sharp Aquos LCD TV turned on with colors all smudged in some places on the screen that remain like that even without any kind of video source. I do have image but the colors are smudged/tinted/ washed out in patches as per defects. This to me looks similar to burn in but I’m shore this is not an OLED.

                                          - I did the classic unplug and hold power button to discharge the caps but it didn't help.
                                          - I did a factory reset as well...
                                          07-16-2024, 04:23 AM
                                        • doorzon
                                          AOC AGON AG273QCG refresh problem picture shifts
                                          by doorzon
                                          Hi all,

                                          hopefully someone on this board has an idea on how to begin with troubleshooting this problem.

                                          The monitor AOC AGON AG273QCG (curved 27" QHD monitor) has problems refreshing every 1 to 2 seconds or so. A line appears in the middle of the screen and the lower half of the screen is shifted to the right.

                                          See attached picture.

                                          I am leaning towards an issue with bad soldering of the graphics chip, because the problem used to go away after some time (minutes) but now it is here to stay.
                                          However, this could also be related...
                                          08-12-2023, 02:36 AM
                                        • Tr0ll
                                          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                                          by Tr0ll
                                          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                                          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                                          Original T-con:
                                          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                                          First replacement T-con:

                                          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                                          10-07-2023, 07:48 PM
                                        • Loading...
                                        • No more items.
                                        Working...