Sharp aquos 32 model lc32-px5m tv lcd picture problem

[WEJ]

Hai, to all, sifu, i have a problem with my TV LCD SHARP AQUOS 32 MODEL LC32-PX5M .

The picture from my LCD panel is having problem.What the course of my tv problem simptom.






Are bad T-Con card is the culprit for making the problem?






For information, i already open the back cover panel, and tighten all LVDS and flex riben cabel, but the problem is still same.

I also have reflow all chipset in the T-con card & the video card with rework station heatgun blower









Hoping someone in this forum could guide me to repair the problem.TQ

[tom66]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

I had similar picture problems with a Sharp TV, though it was different from yours, it was solved with a simple reset:

http://www.tgohome.com/ServiceManual...epair_tips.txt

[WEJ]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

I had similar picture problems with a Sharp TV, though it was different from yours, it was solved with a simple reset:

http://www.tgohome.com/ServiceManual...epair_tips.txt

TQ, tom66 for reply my question.For your information, i already try the reset method same as you suggest before, but the TV cannot reset.

Are their any hard reset method that i can use fo my model.

For infomation i also have done reset procedure from my TV manual.Hope any sifu can suggest another method or hardware that i must check.

[tom66]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

TQ, tom66 for reply my question.For your information, i already try the reset method same as you suggest before, but the TV cannot reset.

Are their any hard reset method that i can use fo my model.

For infomation i also have done reset procedure from my TV manual.Hope any sifu can suggest another method or hardware that i must check.

Can you access the service menu? In those steps, can you get to the "K" on the screen after pressing the right buttons? Your set may be different - I'll look up the procedure for yours.

[WEJ]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Can you access the service menu? In those steps, can you get to the "K" on the screen after pressing the right buttons? Your set may be different - I'll look up the procedure for yours.

TQ, tom66, the problem is i cannot get to the "K" on the screen .

For your info i already research the video simptom, but cannot compare with the video simptom from bad T-Con card that i have get.

[WEJ]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Hi, Tom66, i have manage to get to "K" that u suggest earlier, the method is almost same,

The procedure for Sharp Aquos 32 model lc32-px5m is to hold the Input and volume down buttons at the same time (wait 5 seconds) then plug in TV and hold down power button.

For go to menu, hold down vol- & ch-.But in my tv system, i can get the "EEP CLEARB" or Factory Ini or Industry ini.I have scroll down the menu, where is it.

[tom66]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Are there any other reset options- anything sounding like a reset option at all? I'm not very familiar with Sharp TVs. In fact that 32" with the reset is the only one I've fixed.

[WEJ]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Hi, tom66, tq for answering,.To all sifu & Tv LCD repairer, i have manage to get in to diagnostic & testing mode in my TV system, but i cant find any reset function for the system, please help & guide me to troubleshoot this problem.

I am new at LCD TV repairing, but i have many experience for repairing Laptop & PC.

To all, who help, i am appreciate your knowledge.TQ

[tom66]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

I can't see anything either... does the distortion affect all inputs, and does it affect the menus such as the setup menu? Do you have the service manual for this set?

[WEJ]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Hi, Tom66, yes the video problem affect to all input (DVD, satellite decoder input, TV analog input).For the setup menu, the color i think in good shape (red, yellow, blue is ok), only when display the video, the problem acquired.

I have the service manual for The TV but I cant find anything that is related to solving the problem.

Actually, this problem acquire, after my younger son play with video cable input & hdmi input cable at the right side of the TV.

[tom66]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

I was hoping that there might be "Tech Tips Bulletin" available as Sharp usually publish, but it seems not. Does the distortion affect the menus such as the setup menu?

[WEJ]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

I was hoping that there might be "Tech Tips Bulletin" available as Sharp usually publish, but it seems not. Does the distortion affect the menus such as the setup menu?

For the setup menu, the color is good.I will attached another picture for the setup menu.

Are any sifu or LCD TV repairer have sharp aquos LC-32PX5M firmware.I am already check the model firmware at Sharp website, but no firmware for my TV model.

[tom66]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Anything under DVP or DVP-X2 or DVP-M2?

[kevinm34232]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Is the video color inverted? It almost looks like animation.. Anyway we've seen a few of those inverted image problems on here but I don't think anyone found what was causing it.. Wonder if your HDMI port was damaged causing this..

[WEJ]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Is the video color inverted? It almost looks like animation.. Anyway we've seen a few of those inverted image problems on here but I don't think anyone found what was causing it.. Wonder if your HDMI port was damaged causing this..

Hmm, tq kevinm34232 for answering. This model has 2 HDMI PORT, but i have test it, same as other one.

The video port is also same problem to all port.If I can reset my TV to factory default can solve this problem?

[tom66]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

It has worked before for me on a Sharp TV. If you can find a reset option, it is worth a shot. Otherwise, I would say the main board (with the video inputs on it) is likely the cause.

[WEJ]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Hi, any sifu or Tv repairer can give advice or idea to repair & rectify this problem

[godofwap]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Hi, i have an LC46X20E which recently has given me the 2 x power 3 x OPC error code which as i understand is a power supply detection error, ive tried 3 different power boards but when i try to get into service mode i dont get the "k" to get into service mode, ive tried numerous combinations but i just keep getting the same blinking led error....please help as im at my wits end.

[tom66]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Certain blink codes cannot be overriden such as blink codes starting with "2". The fault is unlikely to be on the power board. It is likely on the main board.

[godofwap]

Re: Sharp aquos 32 model lc32-px5m tv lcd picture problem

Thanks for your reply, i'll order a main board and see if that helps