sony Kdl 46s4100 46"

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rudy.ALvarez91586
    Member
    • Sep 2012
    • 22
    • California

    #1

    sony Kdl 46s4100 46"

    okay so i have the tv and i got the new main board the one with the av jacks put in brand new from partstore.com and now instead of having a steady green i have a 2 flash standy error code does this mean i got a bad main board or is it the power supply G board bad
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: sony Kdl 46s4100 46"

    Did the old main board work, if not, is the fault the same? Is the main board from the EXACT same TV - Sony, as well as Samsung TVs, are very fussy with this.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • Rudy.ALvarez91586
      Member
      • Sep 2012
      • 22
      • California

      #3
      Re: sony Kdl 46s4100 46"

      Yes the mainboard is the same as the other one i pulled out i followed the serial on the tv manual and i also i have the troubleshoot manual the old main board fault was no picture no sound i also took voltage readings on the tcon and found that i wasn't getting 15 v where i was suppose to either

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: sony Kdl 46s4100 46"

        Here's the service manual for your TV:


        "The units in this manual DOES NOT contain a self-diagnostic function."

        Argh! So they do not specify what 2 blinks mean and simply say "change both." How helpful.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • Rudy.ALvarez91586
          Member
          • Sep 2012
          • 22
          • California

          #5
          Re: sony Kdl 46s4100 46"

          but on the manual i got it from you from another post found it reading through other peoples problems through the tv anyways i also don't voltage goin to the tcon board where it says i should have 15v or so

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: sony Kdl 46s4100 46"

            That may simply be because it's not passing its self check and not leaving standby.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • Rudy.ALvarez91586
              Member
              • Sep 2012
              • 22
              • California

              #7
              Re: sony Kdl 46s4100 46"

              okay also i don't get a test screen or sony logo when i do power it on when i had the other motherboard that didn't give me the 2 blink just the solid green at this point i am going to have to change the G board to get rid of the 2 blink problem

              Comment

              • Rudy.ALvarez91586
                Member
                • Sep 2012
                • 22
                • California

                #8
                Re: sony Kdl 46s4100 46"

                is there a back light bulb that needs to be changed on this tv I don't really see anything i followed all the instructions is there something visual i can see that will tell me that the tv is bad other than capacitors

                Comment

                • drpj23
                  Badcaps Veteran
                  • May 2012
                  • 528
                  • USA

                  #9
                  Re: sony Kdl 46s4100 46"

                  2 blinks for an S2000 model is abnormal voltage D5V/A9V power voltage.

                  And for your visual question, no not really lol.
                  Other than visually blown components (like something literally blew up) (and caps) it is testing and deductive reasoning.

                  So G board could be your best bet.

                  And I do not think this set is known for bad bulbs.

                  Comment

                  • Rudy.ALvarez91586
                    Member
                    • Sep 2012
                    • 22
                    • California

                    #10
                    Re: sony Kdl 46s4100 46"

                    i don't even get the test screen or voltage on the balancer board at all where are these so called bulbs ????

                    Comment

                    • drpj23
                      Badcaps Veteran
                      • May 2012
                      • 528
                      • USA

                      #11
                      Re: sony Kdl 46s4100 46"

                      Ok, for the MB that lets the set turn on to the green light, what are all the voltages (in respect to the legend) coming out of the power supply?

                      LCDs need a backlight in order for you to see the image. Behind the LCD there are CCFL tubes (in your case) which are the lamps or bulbs in this sense. These don't usually go bad or at least A LOT less often than the HV transformers for them.

                      Comment

                      • Rudy.ALvarez91586
                        Member
                        • Sep 2012
                        • 22
                        • California

                        #12
                        Re: sony Kdl 46s4100 46"

                        but if they are bad is it expensive to fix (CCFL tubes) would the tv be worth it to fix it
                        Last edited by Rudy.ALvarez91586; 10-07-2012, 12:08 AM. Reason: thought of something else to add

                        Comment

                        • drpj23
                          Badcaps Veteran
                          • May 2012
                          • 528
                          • USA

                          #13
                          Re: sony Kdl 46s4100 46"

                          I replaced one in a sharp. It was $22 for one but why are you so strongly suspecting the bulbs?

                          As far as I know, we could just simply have a power supply issue.

                          Comment

                          • Rudy.ALvarez91586
                            Member
                            • Sep 2012
                            • 22
                            • California

                            #14
                            Re: sony Kdl 46s4100 46"

                            well i have a new Mother board and power supply on order i will see what happens

                            Comment

                            • Rudy.ALvarez91586
                              Member
                              • Sep 2012
                              • 22
                              • California

                              #15
                              Re: sony Kdl 46s4100 46"

                              well i changed the both the G board and the A board (the main board and the power board) fired up the tv and been working like a champ sorry it took long to reply on the post for the people looking at this i forgot my password to get in and i been to busy watching tv

                              Comment

                              Related Topics

                              Collapse

                              • jb_Bak
                                Sony xbr-65x900c main board issues?
                                by jb_Bak
                                Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                                Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                                Power Board Connector that goes to Main board
                                CN6401
                                Pin 01 NC
                                Pin 02 NC
                                Pin 03 "BL_ON": 0V
                                Pin 04 "N/C"
                                Pin 05 "STBY 3.3V": 3.5V
                                Pin 06 "GND": N/C
                                Pin 07 "AC_OFF"...
                                09-27-2021, 04:52 PM
                              • Dani_2024
                                Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                                by Dani_2024
                                Hi and thanks in advance for any input you might provide!
                                I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                                Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                                Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                                10-28-2024, 05:06 PM
                              • ygorsan
                                LG 55NANO77SRA TV – Menu scrolling by itself even after removing button board (Main Board EBU66792103)
                                by ygorsan
                                Hi everyone,




                                I’m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







                                🧩 Problem Summary:
                                • The TV keeps scrolling through the menu or selecting items by itself.
                                • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
                                • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
                                • I
                                ...
                                07-28-2025, 08:34 AM
                              • JDC
                                (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                                by JDC
                                ONN 100012588
                                Issue: No Power, Then Rebooting After Main Board Change

                                Short answer: replace main board and power board
                                Technical answer: replace main board and Q306 & Q307 on power board.

                                Long answer:

                                TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                                07-15-2022, 07:39 AM
                              • m1ch43lzm
                                HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                                by m1ch43lzm
                                Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                                Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                                05-12-2025, 08:37 PM
                              • Loading...
                              • No more items.
                              Working...