Have a Viewsonic N2635w with no sound and no picture. All caps on power supply replaced. Pulled T-con board and checked fuse which checked good. Any ideas as to where to go from there.
Attached Files
-
-
Re: No picture no sound
1) Your pictures are too low resolution. See my sig file below on how to post pictures.Originally posted by 2smoovedaddy View Post
2) Does the power LED show anything?
3) Is the picture of the power supply before or after you replaced the caps?
4) What brand and series did you use for replacements?
5) Do you know how to measure DC voltage?--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---
Comment