Bush IDLCD32TV016HD switches off after 10mins

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • shepp
    Badcaps Veteran
    • Mar 2012
    • 377
    • England
    #1

    Bush IDLCD32TV016HD switches off after 10mins

    hi all, just picked this tv up and ive not managed to get the fault, however the picture and the sound cut out for about a second every now and then, not often enough to check the voltages for faults

    all voltages are stable and correct

    is there any parts that i should just swop anyway, like on the vestel them dodgy poly red caps?
    Attached Files
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Bush IDLCD32TV016HD switches off after 10mins

      Check the LPT connector on the main board - big one looks like an oversized parallel port - check it is seated properly.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • selldoor
          Slow Learner
          • Dec 2010
          • 7870
          #3
          Re: Bush IDLCD32TV016HD switches off after 10mins

          It has a severe case of dust? - a good clean will help it run fractionally cooler.

          There is a current thread on a polaroid which looks to have the same PS. perhaps you could look in on it.
          Please upload pictures using attachment function when ask for help on the repair
          http://www.badcaps.net/forum/showthread.php?t=39740

            Comment

            • shepp
              Badcaps Veteran
              • Mar 2012
              • 377
              • England
              #4
              Re: Bush IDLCD32TV016HD switches off after 10mins

              Originally posted by selldoor
              It has a severe case of dust? - a good clean will help it run fractionally cooler.

              There is a current thread on a polaroid which looks to have the same PS. perhaps you could look in on it.
              ye ive cleaned it out, and ive reseated all the connectors, its still on since earlier so still no shut down!

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Capacitorial
                  Powersupply has all the voltages - Monitor still no power
                  by Capacitorial
                  Hello guys,

                  I have a Philips 240B7QPJEB. The monitor seems completely dead.
                  I opened it and measured the voltages of the powersupply. I found that a mosfet was dead and replaced it.
                  On the connector, that goes to the TCON board, all voltages 15-19V and 5V are present.
                  The small connector on the left of the PSU has two cables with 18V and all the other have 0.2V. It connects on this small connector on the left ontop of the panel. I guess the backlight? Seens fine I guess.
                  The weird thing is, that the Power LED is powered over the TCON board.
                  On The TCON...
                  12-28-2024, 02:12 PM
                • FlailingEngineer
                  Help with Bush Tv (Vestel 17mb95m Mainboard)
                  by FlailingEngineer
                  Hi, I was recently given a Bush Smart TV by a friend and the main board seems to be hanging on by a thread.

                  Before we get to that, my first obstacle was figuring out the model number since the back sticker has gone for a walk. Upon taking off the back case, I noticed the following Vestel parts, 17MB95m mainboard, 17IPS71 (what I'd assume is power supply) and a VES420UNVL-3D-S02 display panel. After doing some research I think the TV I have is a Bush ELED42240FHDCNTD3D, based on the matching image here (https://www.manualslib.com/manual/11...td3d.html#manu...
                  05-31-2023, 06:52 AM
                • gjgib
                  Help reading schematic voltages input/output
                  by gjgib
                  Hello, this might be embarassing since I consider it a dumb question but keeps me kinda stuck sometimes in my journey.

                  I want to know if there is any post in this forum which explains my questions. A) When, where and how do I know when X voltage line is input or output. Example:


                  I'm battling with this IC to understand it's voltages. It's from non-turning-on Lenovo Ideapad 3 15iil05 - NM-D461.

                  I see some lines like +5VL / +5VALW / V9B+ / +3VALW being okay and some others like 1.8VALW / +0.6VS / +2.5V_DDR. I just know that some of them are bad or missing,...
                  05-06-2024, 08:11 PM
                • RossMoodley1967
                  HISENSE LCD LED TV MODEL HX40N2176F LED DRIVER SN51DP IC PINOUT AND VOLTAGES
                  by RossMoodley1967
                  Hello

                  Need to know the voltages that will be present on SN51DP ic when tv is in standby and when powered on.

                  Just to elaborate on the problem with the tv 1.set came in with flash of HISENSE logo on screen then back into standby.2. Now tv when plugged in red standby light present to quickly changes to blue but no backlights.3.Then an hour ago i checked again , came on standby and stayed until i pressed the power button which changed to power on (blue)4.As far as the led driver circuit goes voltage at output in standby was 38v , power on led light up voltages rise 58v-68v...
                  03-01-2024, 06:07 AM
                • karlp028
                  MSI Z390-A PRO missing VCORE voltages
                  by karlp028
                  I've got an MSI Z390-A Pro motherboard that starts up fine, but it's missing the VCORE (and VGT) voltages. All of the other voltages are present (e.g. VCCSA, VCCIO) and I know the CPU (i7-9700k) is good. Now, the original PWM controller (UP9521P) had an internal short and I replaced it with a new one. All of the enable signals look good. The problem seems to be the PWM signals going to the MOSFET drivers. I checked them with an oscilloscope and they are all flat 1.5V with no pulses. I don't know why this would be and I'm not sure where to look next.
                  06-23-2025, 01:25 AM
                • Loading...
                • No more items.
                Working...